On Fri, Aug 23, 2019 at 12:28 AM Dilip Kota <eswara.k...@linux.intel.com> wrote: > > Add YAML schemas for the reset controller on Intel > Lightening Mountain (LGM) SoC. > > Signed-off-by: Dilip Kota <eswara.k...@linux.intel.com> > --- > Changes on v2: > Address review comments > Update the compatible property definition > Add description for reset-cells > Add 'additionalProperties: false' property > > .../bindings/reset/intel,syscon-reset.yaml | 53 > ++++++++++++++++++++++ > 1 file changed, 53 insertions(+) > create mode 100644 > Documentation/devicetree/bindings/reset/intel,syscon-reset.yaml > > diff --git a/Documentation/devicetree/bindings/reset/intel,syscon-reset.yaml > b/Documentation/devicetree/bindings/reset/intel,syscon-reset.yaml > new file mode 100644 > index 000000000000..3403a967190a > --- /dev/null > +++ b/Documentation/devicetree/bindings/reset/intel,syscon-reset.yaml > @@ -0,0 +1,53 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/reset/intel,syscon-reset.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Intel Lightening Mountain SoC System Reset Controller > + > +maintainers: > + - Dilip Kota <eswara.k...@linux.intel.com> > + > +properties: > + compatible: > + items: > + - const: intel,rcu-lgm > + - const: syscon > + > + reg: > + description: Reset controller register base address and size > + > + intel,global-reset: > + $ref: /schemas/types.yaml#/definitions/uint32-array > + description: Global reset register offset and bit offset. > + > + "#reset-cells": > + const: 2 > + description: | > + The 1st cell is the register offset. > + The 2nd cell is the bit offset in the register. > + > +required: > + - compatible > + - reg > + - intel,global-reset > + - "#reset-cells" > + > +additionalProperties: false > + > +examples: > + - | > + rcu0: reset-controller@00000000 { > + compatible = "intel,rcu-lgm", "syscon"; > + reg = <0x000000 0x80000>; > + intel,global-reset = <0x10 30>; > + #reset-cells = <2>; > + }; > + > + pcie_phy0: pciephy@... { > + ...
You need to run 'make dt_binding_check' and fix the warnings. The example has to be buildable and it is not. > + /* address offset: 0x10, bit offset: 12 */ > + resets = <&rcu0 0x10 12>; > + ... > + }; > -- > 2.11.0 >
