Le 24/08/2019 à 02:18, Xiaowei Bao a écrit :


-----Original Message-----
From: Andrew Murray <andrew.mur...@arm.com>
Sent: 2019年8月23日 22:28
To: Xiaowei Bao <xiaowei....@nxp.com>
Cc: bhelg...@google.com; robh...@kernel.org; mark.rutl...@arm.com;
shawn...@kernel.org; Leo Li <leoyang...@nxp.com>; kis...@ti.com;
lorenzo.pieral...@arm.co; a...@arndb.de; gre...@linuxfoundation.org; M.h.
Lian <minghuan.l...@nxp.com>; Mingkai Hu <mingkai...@nxp.com>; Roy
Zang <roy.z...@nxp.com>; jingooh...@gmail.com;
gustavo.pimen...@synopsys.com; linux-...@vger.kernel.org;
devicet...@vger.kernel.org; linux-kernel@vger.kernel.org;
linux-arm-ker...@lists.infradead.org; linuxppc-...@lists.ozlabs.org
Subject: Re: [PATCH v2 08/10] PCI: layerscape: Add EP mode support for
ls1088a and ls2088a

On Thu, Aug 22, 2019 at 07:22:40PM +0800, Xiaowei Bao wrote:
Add PCIe EP mode support for ls1088a and ls2088a, there are some
difference between LS1 and LS2 platform, so refactor the code of the
EP driver.

Signed-off-by: Xiaowei Bao <xiaowei....@nxp.com>
---
v2:
  - New mechanism for layerscape EP driver.

Was there a v1 of this patch?

Yes, but I don't know how to comments, ^_^

As far as I can see, in the previous version of the series (https://patchwork.ozlabs.org/project/linuxppc-dev/list/?series=125315&state=*), the 8/10 was something completely different, and I can't find any other patch in the series that could have been the v1 of this patch.

Christophe




  drivers/pci/controller/dwc/pci-layerscape-ep.c | 76
++++++++++++++++++++------
  1 file changed, 58 insertions(+), 18 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-layerscape-ep.c
b/drivers/pci/controller/dwc/pci-layerscape-ep.c
index 7ca5fe8..2a66f07 100644
--- a/drivers/pci/controller/dwc/pci-layerscape-ep.c
+++ b/drivers/pci/controller/dwc/pci-layerscape-ep.c
@@ -20,27 +20,29 @@

  #define PCIE_DBI2_OFFSET              0x1000  /* DBI2 base address*/

-struct ls_pcie_ep {
-       struct dw_pcie          *pci;
-       struct pci_epc_features *ls_epc;
+#define to_ls_pcie_ep(x)       dev_get_drvdata((x)->dev)
+
+struct ls_pcie_ep_drvdata {
+       u32                             func_offset;
+       const struct dw_pcie_ep_ops     *ops;
+       const struct dw_pcie_ops        *dw_pcie_ops;
  };

-#define to_ls_pcie_ep(x)       dev_get_drvdata((x)->dev)
+struct ls_pcie_ep {
+       struct dw_pcie                  *pci;
+       struct pci_epc_features         *ls_epc;
+       const struct ls_pcie_ep_drvdata *drvdata; };

  static int ls_pcie_establish_link(struct dw_pcie *pci)  {
        return 0;
  }

-static const struct dw_pcie_ops ls_pcie_ep_ops = {
+static const struct dw_pcie_ops dw_ls_pcie_ep_ops = {
        .start_link = ls_pcie_establish_link,  };

-static const struct of_device_id ls_pcie_ep_of_match[] = {
-       { .compatible = "fsl,ls-pcie-ep",},
-       { },
-};
-
  static const struct pci_epc_features*  ls_pcie_ep_get_features(struct
dw_pcie_ep *ep)  { @@ -82,10 +84,44 @@ static int
ls_pcie_ep_raise_irq(struct dw_pcie_ep *ep, u8 func_no,
        }
  }

-static const struct dw_pcie_ep_ops pcie_ep_ops = {
+static unsigned int ls_pcie_ep_func_conf_select(struct dw_pcie_ep *ep,
+                                               u8 func_no)
+{
+       struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+       struct ls_pcie_ep *pcie = to_ls_pcie_ep(pci);
+       u8 header_type;
+
+       header_type = ioread8(pci->dbi_base + PCI_HEADER_TYPE);
+
+       if (header_type & (1 << 7))
+               return pcie->drvdata->func_offset * func_no;
+       else
+               return 0;

It looks like there isn't a PCI define for multi function, the nearest I could 
find
was PCI_HEADER_TYPE_MULTIDEVICE in hotplug/ibmphp.h. A comment
above the test might be helpful to explain the test.

Yes, I have not find the PCI_HEADER_TYPE_MULTIDEVICE define. OK, I will add
The comments in next version patch.


As the ls_pcie_ep_drvdata structures are static, the unset .func_offset will be
initialised to 0, so you could just drop the test above.

OK, thanks


However something to the effect of the following may help spot
misconfiguration:

WARN_ON(func_no && !pcie->drvdata->func_offset); return
pcie->drvdata->func_offset * func_no;

Thanks a lot, this looks better.


The WARN is probably quite useful as if you are attempting to use non-zero
functions and func_offset isn't set - then things may appear to work normally
but actually will break horribly.

got it, thanks.


Thanks,

Andrew Murray

+}
+
+static const struct dw_pcie_ep_ops ls_pcie_ep_ops = {
        .ep_init = ls_pcie_ep_init,
        .raise_irq = ls_pcie_ep_raise_irq,
        .get_features = ls_pcie_ep_get_features,
+       .func_conf_select = ls_pcie_ep_func_conf_select, };
+
+static const struct ls_pcie_ep_drvdata ls1_ep_drvdata = {
+       .ops = &ls_pcie_ep_ops,
+       .dw_pcie_ops = &dw_ls_pcie_ep_ops,
+};
+
+static const struct ls_pcie_ep_drvdata ls2_ep_drvdata = {
+       .func_offset = 0x20000,
+       .ops = &ls_pcie_ep_ops,
+       .dw_pcie_ops = &dw_ls_pcie_ep_ops,
+};
+
+static const struct of_device_id ls_pcie_ep_of_match[] = {
+       { .compatible = "fsl,ls1046a-pcie-ep", .data = &ls1_ep_drvdata },
+       { .compatible = "fsl,ls1088a-pcie-ep", .data = &ls2_ep_drvdata },
+       { .compatible = "fsl,ls2088a-pcie-ep", .data = &ls2_ep_drvdata },
+       { },
  };

  static int __init ls_add_pcie_ep(struct ls_pcie_ep *pcie, @@ -98,7
+134,7 @@ static int __init ls_add_pcie_ep(struct ls_pcie_ep *pcie,
        int ret;

        ep = &pci->ep;
-       ep->ops = &pcie_ep_ops;
+       ep->ops = pcie->drvdata->ops;

        res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
"addr_space");
        if (!res)
@@ -137,14 +173,11 @@ static int __init ls_pcie_ep_probe(struct
platform_device *pdev)
        if (!ls_epc)
                return -ENOMEM;

-       dbi_base = platform_get_resource_byname(pdev, IORESOURCE_MEM,
"regs");
-       pci->dbi_base = devm_pci_remap_cfg_resource(dev, dbi_base);
-       if (IS_ERR(pci->dbi_base))
-               return PTR_ERR(pci->dbi_base);
+       pcie->drvdata = of_device_get_match_data(dev);

-       pci->dbi_base2 = pci->dbi_base + PCIE_DBI2_OFFSET;
        pci->dev = dev;
-       pci->ops = &ls_pcie_ep_ops;
+       pci->ops = pcie->drvdata->dw_pcie_ops;
+
        pcie->pci = pci;

        ls_epc->linkup_notifier = false,
@@ -152,6 +185,13 @@ static int __init ls_pcie_ep_probe(struct
platform_device *pdev)

        pcie->ls_epc = ls_epc;

+       dbi_base = platform_get_resource_byname(pdev, IORESOURCE_MEM,
"regs");
+       pci->dbi_base = devm_pci_remap_cfg_resource(dev, dbi_base);
+       if (IS_ERR(pci->dbi_base))
+               return PTR_ERR(pci->dbi_base);
+
+       pci->dbi_base2 = pci->dbi_base + PCIE_DBI2_OFFSET;
+
        platform_set_drvdata(pdev, pcie);

        ret = ls_add_pcie_ep(pcie, pdev);
--
2.9.5


---
L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel 
antivirus Avast.
https://www.avast.com/antivirus

Reply via email to