On Fri, Aug 23, 2019 at 05:27:47PM -0700, Andrey Smirnov wrote:
> The devicetree specification recommends using generic node names.
>
> Some ZII dts files already follow such recommendation, but some don't,
> so use generic node names for consistency among the ZII dts files.
>
> Signed-off-by: Andrey Smirnov <andrew.smir...@gmail.com>
> Cc: Shawn Guo <shawn...@kernel.org>
> Cc: Chris Healy <cphe...@gmail.com>
> Cc: Cory Tusar <cory.tu...@zii.aero>
> Cc: Fabio Estevam <feste...@gmail.com>
> Cc: linux-arm-ker...@lists.infradead.org
> Cc: linux-kernel@vger.kernel.org
It doesn't apply to my branch.
Shawn
> ---
> arch/arm/boot/dts/vf610-zii-scu4-aib.dts | 24 ++++++++++++------------
> 1 file changed, 12 insertions(+), 12 deletions(-)
>
> diff --git a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
> b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
> index 45a978defbdc..6edd682dbd29 100644
> --- a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
> +++ b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
> @@ -417,7 +417,7 @@
> pinctrl-0 = <&pinctrl_dspi1>;
> status = "okay";
>
> - spi-flash@0 {
> + flash@0 {
> #address-cells = <1>;
> #size-cells = <1>;
> compatible = "jedec,spi-nor";
> @@ -430,7 +430,7 @@
> };
> };
>
> - spi-flash@1 {
> + flash@1 {
> #address-cells = <1>;
> #size-cells = <1>;
> compatible = "jedec,spi-nor";
> @@ -519,7 +519,7 @@
> #gpio-cells = <2>;
> };
>
> - lm75@48 {
> + temp-sensor@48 {
> compatible = "national,lm75";
> reg = <0x48>;
> };
> @@ -534,7 +534,7 @@
> reg = <0x52>;
> };
>
> - ds1682@6b {
> + elapsed-time-recorder@6b {
> compatible = "dallas,ds1682";
> reg = <0x6b>;
> };
> @@ -551,7 +551,7 @@
> reg = <0x38>;
> };
>
> - adt7411@4a {
> + adc@4a {
> compatible = "adi,adt7411";
> reg = <0x4a>;
> };
> @@ -563,7 +563,7 @@
> pinctrl-0 = <&pinctrl_i2c2>;
> status = "okay";
>
> - gpio9: sx1503q@20 {
> + gpio9: io-expander@20 {
> compatible = "semtech,sx1503q";
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_sx1503_20>;
> @@ -574,12 +574,12 @@
> interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
> };
>
> - lm75@4e {
> + temp-sensor@4e {
> compatible = "national,lm75";
> reg = <0x4e>;
> };
>
> - lm75@4f {
> + temp-sensor@4f {
> compatible = "national,lm75";
> reg = <0x4f>;
> };
> @@ -591,17 +591,17 @@
> reg = <0x23>;
> };
>
> - adt7411@4a {
> + adc@4a {
> compatible = "adi,adt7411";
> reg = <0x4a>;
> };
>
> - at24c08@54 {
> + eeprom@54 {
> compatible = "atmel,24c08";
> reg = <0x54>;
> };
>
> - tca9548@70 {
> + i2c-mux@70 {
> compatible = "nxp,pca9548";
> pinctrl-names = "default";
> #address-cells = <1>;
> @@ -639,7 +639,7 @@
> };
> };
>
> - tca9548@71 {
> + i2c-mux@71 {
> compatible = "nxp,pca9548";
> pinctrl-names = "default";
> reg = <0x71>;
> --
> 2.21.0
>
