From: Tudor Ambarus <tudor.amba...@microchip.com>
All flash parameters and settings should reside inside
'struct spi_nor_flash_parameter'. Drop the local copy of
quad_enable() and use the one from 'struct spi_nor_flash_parameter'.
Signed-off-by: Tudor Ambarus <tudor.amba...@microchip.com>
Reviewed-by: Boris Brezillon <boris.brezil...@collabora.com>
---
v3: Collect R-b
drivers/mtd/spi-nor/spi-nor.c | 40 +++++++++++++++++++++++-----------------
include/linux/mtd/spi-nor.h | 2 --
2 files changed, 23 insertions(+), 19 deletions(-)
diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index e9b9cd70a999..effda372cb33 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -4403,7 +4403,6 @@ static int spi_nor_setup(struct spi_nor *nor,
{
struct spi_nor_flash_parameter *params = &nor->params;
u32 ignored_mask, shared_mask;
- bool enable_quad_io;
int err;
/*
@@ -4457,23 +4456,33 @@ static int spi_nor_setup(struct spi_nor *nor,
return err;
}
- /* Enable Quad I/O if needed. */
- enable_quad_io = (spi_nor_get_protocol_width(nor->read_proto) == 4 ||
- spi_nor_get_protocol_width(nor->write_proto) == 4);
- if (enable_quad_io && params->quad_enable)
- nor->quad_enable = params->quad_enable;
- else
- nor->quad_enable = NULL;
-
return 0;
}
+/**
+ * spi_nor_quad_enable() - enable Quad I/O if needed.
+ * @nor: pointer to a 'struct spi_nor'
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_quad_enable(struct spi_nor *nor)
+{
+ if (!nor->params.quad_enable)
+ return 0;
+
+ if (!(spi_nor_get_protocol_width(nor->read_proto) == 4 ||
+ spi_nor_get_protocol_width(nor->write_proto) == 4))
+ return 0;
+
+ return nor->params.quad_enable(nor);
+}
+
static int spi_nor_init(struct spi_nor *nor)
{
int err;
if (nor->clear_sr_bp) {
- if (nor->quad_enable == spansion_quad_enable)
+ if (nor->params.quad_enable == spansion_quad_enable)
nor->clear_sr_bp = spi_nor_spansion_clear_sr_bp;
err = nor->clear_sr_bp(nor);
@@ -4484,12 +4493,10 @@ static int spi_nor_init(struct spi_nor *nor)
}
}
- if (nor->quad_enable) {
- err = nor->quad_enable(nor);
- if (err) {
- dev_err(nor->dev, "quad mode not supported\n");
- return err;
- }
+ err = spi_nor_quad_enable(nor);
+ if (err) {
+ dev_err(nor->dev, "quad mode not supported\n");
+ return err;
}
if (nor->addr_width == 4 && !(nor->flags & SNOR_F_4B_OPCODES)) {
@@ -4706,7 +4713,6 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
* - select op codes for (Fast) Read, Page Program and Sector Erase.
* - set the number of dummy cycles (mode cycles + wait states).
* - set the SPI protocols for register and memory accesses.
- * - set the Quad Enable bit if needed (required by SPI x-y-4 protos).
*/
ret = spi_nor_setup(nor, hwcaps);
if (ret)
diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
index 77ba692d9348..17787238f0e9 100644
--- a/include/linux/mtd/spi-nor.h
+++ b/include/linux/mtd/spi-nor.h
@@ -535,7 +535,6 @@ struct flash_info;
* @flash_unlock: [FLASH-SPECIFIC] unlock a region of the SPI NOR
* @flash_is_locked: [FLASH-SPECIFIC] check if a region of the SPI NOR is
* completely locked
- * @quad_enable: [FLASH-SPECIFIC] enables SPI NOR quad mode
* @clear_sr_bp: [FLASH-SPECIFIC] clears the Block Protection Bits from
* the SPI NOR Status Register.
* @params: [FLASH-SPECIFIC] SPI-NOR flash parameters and settings.
@@ -579,7 +578,6 @@ struct spi_nor {
int (*flash_lock)(struct spi_nor *nor, loff_t ofs, uint64_t len);
int (*flash_unlock)(struct spi_nor *nor, loff_t ofs, uint64_t len);
int (*flash_is_locked)(struct spi_nor *nor, loff_t ofs, uint64_t len);
- int (*quad_enable)(struct spi_nor *nor);
int (*clear_sr_bp)(struct spi_nor *nor);
struct spi_nor_flash_parameter params;
--
2.9.5
