On Tue, Aug 20, 2019 at 2:09 AM Denis Efremov <[email protected]> wrote:
>
> Remove pciehp_green_led_{on,off,blink}() and use pciehp_set_indicators()
> instead, since the code is mostly the same.
>
> Signed-off-by: Denis Efremov <[email protected]>
> ---
>  drivers/pci/hotplug/pciehp.h      |  3 ---
>  drivers/pci/hotplug/pciehp_ctrl.c | 12 ++++++++---
>  drivers/pci/hotplug/pciehp_hpc.c  | 36 -------------------------------
>  3 files changed, 9 insertions(+), 42 deletions(-)
>
> diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h
> index acda513f37d7..da429345cf70 100644
> --- a/drivers/pci/hotplug/pciehp.h
> +++ b/drivers/pci/hotplug/pciehp.h
> @@ -170,9 +170,6 @@ void pciehp_get_power_status(struct controller *ctrl, u8 
> *status);
>  void pciehp_set_indicators(struct controller *ctrl, int pwr, int attn);
>  void pciehp_get_latch_status(struct controller *ctrl, u8 *status);
>  int pciehp_query_power_fault(struct controller *ctrl);
> -void pciehp_green_led_on(struct controller *ctrl);
> -void pciehp_green_led_off(struct controller *ctrl);
> -void pciehp_green_led_blink(struct controller *ctrl);
>  bool pciehp_card_present(struct controller *ctrl);
>  bool pciehp_card_present_or_link_active(struct controller *ctrl);
>  int pciehp_check_link_status(struct controller *ctrl);
> diff --git a/drivers/pci/hotplug/pciehp_ctrl.c 
> b/drivers/pci/hotplug/pciehp_ctrl.c
> index 232f7bfcfce9..862fe86e87cc 100644
> --- a/drivers/pci/hotplug/pciehp_ctrl.c
> +++ b/drivers/pci/hotplug/pciehp_ctrl.c
> @@ -65,7 +65,9 @@ static int board_added(struct controller *ctrl)
>                         return retval;
>         }
>
> -       pciehp_green_led_blink(ctrl);
> +       pciehp_set_indicators(ctrl, PCI_EXP_SLTCTL_PWR_IND_BLINK,
> +                             PCI_EXP_SLTCTL_ATTN_IND_NONE);

I think it woud be good if you provided a helper macro for setting one
of the indicators rather than open coding the _NONE constant. e.g.

#define set_power_indicator(ctrl, x) pciehp_set_indicators(ctrl, (x),
PCI_EXP_SLTCTL_ATTN_IND_NONE);

then you can do:

set_power_indicator(ctrl, PCI_EXP_SLTCTL_PWR_IND_BLINK);

which is a bit nicer to read.

Reply via email to