On Thu, Aug 29, 2019 at 12:11:54PM -0600, Lina Iyer wrote:
> In addition to configuring the PDC, additional registers that interface
> the GIC have to be configured to match the GPIO type. The registers on
> some QCOM SoCs are access restricted, while on other SoCs are not. They
> SoCs with access restriction to these SPI registers need to be written

Took me a minute to figure out this is GIC SPI interrupts, not SPI bus.

> from the firmware using the SCM interface. Add a flag to indicate if the
> register is to be written using SCM interface.
> 
> Cc: devicet...@vger.kernel.org
> Signed-off-by: Lina Iyer <il...@codeaurora.org>
> ---
>  .../bindings/interrupt-controller/qcom,pdc.txt           | 9 ++++++++-
>  1 file changed, 8 insertions(+), 1 deletion(-)
> 
> diff --git 
> a/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt 
> b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt
> index 8e0797cb1487..852fcba98ea6 100644
> --- a/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt
> +++ b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt
> @@ -50,15 +50,22 @@ Properties:
>                   The second element is the GIC hwirq number for the PDC port.
>                   The third element is the number of interrupts in sequence.
>  
> +- qcom,scm-spi-cfg:
> +     Usage: optional
> +     Value type: <bool>
> +     Definition: Specifies if the SPI configuration registers have to be
> +                 written from the firmware.
> +
>  Example:
>  
>       pdc: interrupt-controller@b220000 {
>               compatible = "qcom,sdm845-pdc";
> -             reg = <0xb220000 0x30000>;
> +             reg = <0xb220000 0x30000>, <0x179900f0 0x60>;

There needs to be a description for reg updated. These aren't GIC 
registers are they? Because those go in the GIC node.

>               qcom,pdc-ranges = <0 512 94>, <94 641 15>, <115 662 7>;
>               #interrupt-cells = <2>;
>               interrupt-parent = <&intc>;
>               interrupt-controller;
> +             qcom,scm-spi-cfg;
>       };
>  
>  DT binding of a device that wants to use the GIC SPI 514 as a wakeup
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
> 

Reply via email to