This change syncs the `ethtool-copy.h` file with Linux net-next to add
support for Energy Detect Powerdown control via phy tunable.
Some formatting also changes with this sync.
Signed-off-by: Alexandru Ardelean <alexandru.ardel...@analog.com>
---
ethtool-copy.h | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a/ethtool-copy.h b/ethtool-copy.h
index ad16e8f..8b9a87d 100644
--- a/ethtool-copy.h
+++ b/ethtool-copy.h
@@ -257,10 +257,15 @@ struct ethtool_tunable {
#define ETHTOOL_PHY_FAST_LINK_DOWN_ON 0
#define ETHTOOL_PHY_FAST_LINK_DOWN_OFF 0xff
+#define ETHTOOL_PHY_EDPD_DFLT_TX_INTERVAL 0x7fff
+#define ETHTOOL_PHY_EDPD_NO_TX 0x8000
+#define ETHTOOL_PHY_EDPD_DISABLE 0
+
enum phy_tunable_id {
ETHTOOL_PHY_ID_UNSPEC,
ETHTOOL_PHY_DOWNSHIFT,
ETHTOOL_PHY_FAST_LINK_DOWN,
+ ETHTOOL_PHY_EDPD,
/*
* Add your fresh new phy tunable attribute above and remember to update
* phy_tunable_strings[] in net/core/ethtool.c
@@ -1481,8 +1486,8 @@ enum ethtool_link_mode_bit_indices {
ETHTOOL_LINK_MODE_200000baseLR4_ER4_FR4_Full_BIT = 64,
ETHTOOL_LINK_MODE_200000baseDR4_Full_BIT = 65,
ETHTOOL_LINK_MODE_200000baseCR4_Full_BIT = 66,
- ETHTOOL_LINK_MODE_100baseT1_Full_BIT = 67,
- ETHTOOL_LINK_MODE_1000baseT1_Full_BIT = 68,
+ ETHTOOL_LINK_MODE_100baseT1_Full_BIT = 67,
+ ETHTOOL_LINK_MODE_1000baseT1_Full_BIT = 68,
/* must be last entry */
__ETHTOOL_LINK_MODE_MASK_NBITS
@@ -1712,8 +1717,8 @@ static __inline__ int ethtool_validate_duplex(__u8 duplex)
#define ETH_MODULE_SFF_8436 0x4
#define ETH_MODULE_SFF_8436_LEN 256
-#define ETH_MODULE_SFF_8636_MAX_LEN 640
-#define ETH_MODULE_SFF_8436_MAX_LEN 640
+#define ETH_MODULE_SFF_8636_MAX_LEN 640
+#define ETH_MODULE_SFF_8436_MAX_LEN 640
/* Reset flags */
/* The reset() operation must clear the flags for the components which
--
2.20.1
