On Wed, 2019-09-04 at 12:13 +0200, Philipp Zabel wrote:
> Hi Ezequiel,
>
> On Tue, 2019-09-03 at 14:12 -0300, Ezequiel Garcia wrote:
> > Commit 953aaa1492c53 ("media: rockchip/vpu: Prepare things to support
> > decoders")
> > changed the conditions under S_FMT was allowed for OUTPUT
> > CAPTURE buffers.
> >
> > However, and according to the mem-to-mem stateless decoder specification,
> > in order to support dynamic resolution changes, S_FMT should be allowed
> > even if OUTPUT buffers have been allocated.
> >
> > Relax decoder S_FMT restrictions on OUTPUT buffers, allowing a resolution
> > modification, provided the pixel format stays the same.
> >
> > Tested on RK3288 platforms using ChromiumOS Video Decode/Encode Accelerator
> > Unittests.
> >
> > Fixes: 953aaa1492c53 ("media: rockchip/vpu: Prepare things to support
> > decoders")
> > Signed-off-by: Ezequiel Garcia <[email protected]>
> > ---
> > drivers/staging/media/hantro/hantro_v4l2.c | 22 ++++++++++++++++------
> > 1 file changed, 16 insertions(+), 6 deletions(-)
> >
> > diff --git a/drivers/staging/media/hantro/hantro_v4l2.c
> > b/drivers/staging/media/hantro/hantro_v4l2.c
> > index 3dae52abb96c..d48b548842cf 100644
> > --- a/drivers/staging/media/hantro/hantro_v4l2.c
> > +++ b/drivers/staging/media/hantro/hantro_v4l2.c
> > @@ -367,19 +367,22 @@ vidioc_s_fmt_out_mplane(struct file *file, void
> > *priv, struct v4l2_format *f)
> > {
> > struct v4l2_pix_format_mplane *pix_mp = &f->fmt.pix_mp;
> > struct hantro_ctx *ctx = fh_to_ctx(priv);
> > + struct vb2_queue *vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type);
> > const struct hantro_fmt *formats;
> > unsigned int num_fmts;
> > - struct vb2_queue *vq;
> > int ret;
> >
> > - /* Change not allowed if queue is busy. */
> > - vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type);
> > - if (vb2_is_busy(vq))
> > - return -EBUSY;
> > -
> > if (!hantro_is_encoder_ctx(ctx)) {
> > struct vb2_queue *peer_vq;
> >
> > + /*
> > + * In other to support dynamic resolution change,
> > + * the decoder admits a resolution change, as long
> > + * as the pixelformat remains. Can't be done if streaming.
> > + */
> > + if (vb2_is_streaming(vq) || (vb2_is_busy(vq) &&
> > + pix_mp->pixelformat != ctx->src_fmt.pixelformat))
>
> Before using contents of the v4l2_format f for comparison, we should run
> vidioc_try_fmt_out_mplane over it.
Right, good catch.
> Also, besides pixelformat, sizeimage
> shouldn't change either, at least if this is a VB2_MMAP queue.
>
This is the OUTPUT queue, so I don't see why the sizeimage
of the coded buffers should stay the same. Maybe I'm missing
something?
> > + return -EBUSY;
> > /*
> > * Since format change on the OUTPUT queue will reset
> > * the CAPTURE queue, we can't allow doing so
> > @@ -389,6 +392,13 @@ vidioc_s_fmt_out_mplane(struct file *file, void *priv,
> > struct v4l2_format *f)
> > V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE);
> > if (vb2_is_busy(peer_vq))
> > return -EBUSY;
> > + } else {
> > + /*
> > + * The encoder doesn't admit a format change if
> > + * there are OUTPUT buffers allocated.
> > + */
> > + if (vb2_is_busy(vq))
> > + return -EBUSY;
> > }
> >
> > ret = vidioc_try_fmt_out_mplane(file, priv, f);
>
> I think this needs to be moved up.
>
Right.
Thanks,
Ezequiel
