there is no need to continue keeping the clock in private storage.
Signed-off-by: Jorge Ramirez-Ortiz <[email protected]>
---
drivers/watchdog/qcom-wdt.c | 15 +++++++--------
1 file changed, 7 insertions(+), 8 deletions(-)
diff --git a/drivers/watchdog/qcom-wdt.c b/drivers/watchdog/qcom-wdt.c
index 935c78a882a3..e98f5a3d83ea 100644
--- a/drivers/watchdog/qcom-wdt.c
+++ b/drivers/watchdog/qcom-wdt.c
@@ -42,7 +42,6 @@ static const u32 reg_offset_data_kpss[] = {
struct qcom_wdt {
struct watchdog_device wdd;
- struct clk *clk;
unsigned long rate;
void __iomem *base;
const u32 *layout;
@@ -189,6 +188,7 @@ static int qcom_wdt_probe(struct platform_device *pdev)
const u32 *regs;
u32 percpu_offset;
int irq, ret;
+ struct clk *clk;
regs = of_device_get_match_data(dev);
if (!regs) {
@@ -215,19 +215,18 @@ static int qcom_wdt_probe(struct platform_device *pdev)
if (IS_ERR(wdt->base))
return PTR_ERR(wdt->base);
- wdt->clk = devm_clk_get(dev, NULL);
- if (IS_ERR(wdt->clk)) {
+ clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(clk)) {
dev_err(dev, "failed to get input clock\n");
- return PTR_ERR(wdt->clk);
+ return PTR_ERR(clk);
}
- ret = clk_prepare_enable(wdt->clk);
+ ret = clk_prepare_enable(clk);
if (ret) {
dev_err(dev, "failed to setup clock\n");
return ret;
}
- ret = devm_add_action_or_reset(dev, qcom_clk_disable_unprepare,
- wdt->clk);
+ ret = devm_add_action_or_reset(dev, qcom_clk_disable_unprepare, clk);
if (ret)
return ret;
@@ -239,7 +238,7 @@ static int qcom_wdt_probe(struct platform_device *pdev)
* that it would bite before a second elapses it's usefulness is
* limited. Bail if this is the case.
*/
- wdt->rate = clk_get_rate(wdt->clk);
+ wdt->rate = clk_get_rate(clk);
if (wdt->rate == 0 ||
wdt->rate > 0x10000000U) {
dev_err(dev, "invalid clock rate\n");
--
2.23.0
