From: Peng Fan <peng....@nxp.com>
When registering the PLL, unbypass the PLL.
The PLL has two bypass control bit, BYPASS and EXT_BYPASS.
we will expose EXT_BYPASS to clk driver for mux usage, and keep
BYPASS inside pll14xx usage. The PLL has a restriction that
when M/P change, need to RESET/BYPASS pll to avoid glitch, so
we could not expose BYPASS.
To make it easy for clk driver usage, unbypass PLL which does
not hurt current function.
Fixes: 8646d4dcc7fb ("clk: imx: Add PLLs driver for imx8mm soc")
Reviewed-by: Leonard Crestez <leonard.cres...@nxp.com>
Signed-off-by: Peng Fan <peng....@nxp.com>
---
V3:
None
V2:
New patch
drivers/clk/imx/clk-pll14xx.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/clk/imx/clk-pll14xx.c b/drivers/clk/imx/clk-pll14xx.c
index 656f48b002dd..7a815ec76aa5 100644
--- a/drivers/clk/imx/clk-pll14xx.c
+++ b/drivers/clk/imx/clk-pll14xx.c
@@ -368,6 +368,7 @@ struct clk *imx_clk_pll14xx(const char *name, const char
*parent_name,
struct clk_pll14xx *pll;
struct clk *clk;
struct clk_init_data init;
+ u32 val;
pll = kzalloc(sizeof(*pll), GFP_KERNEL);
if (!pll)
@@ -399,6 +400,10 @@ struct clk *imx_clk_pll14xx(const char *name, const char
*parent_name,
pll->rate_table = pll_clk->rate_table;
pll->rate_count = pll_clk->rate_count;
+ val = readl_relaxed(pll->base + GNRL_CTL);
+ val &= ~BYPASS_MASK;
+ writel_relaxed(val, pll->base + GNRL_CTL);
+
clk = clk_register(NULL, &pll->hw);
if (IS_ERR(clk)) {
pr_err("%s: failed to register pll %s %lu\n",
--
2.16.4
