[PATCH] arm64: dts: ls1046a: Append missing properties of QSPI node on ls1046ardb

[Ashish Kumar]

Update the max-freqquncy to 50MHz, also adding "fast,read,m25p80" property.

Align the QSPI node with other similar boards like(ls1088ardb,
ls1046afrwy) as per bindings.

Also, correct compatible node to fix this warning:
m25p80 spi0.0: found s25fl512s, expected m25p80
m25p80 spi0.1: found s25fl512s, expected m25p80

Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com>
---
 arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts 
b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
index 6a6514d..9c4113a 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
@@ -101,21 +101,23 @@
 &qspi {
        status = "okay";
 
-       qflash0: flash@0 {
-               compatible = "spansion,m25p80";
+       qflash0: s25fs512a@0 {
+               compatible = "spansion,s25fs512a", "jedec,spi-nor";
                #address-cells = <1>;
                #size-cells = <1>;
-               spi-max-frequency = <20000000>;
+               m25p,fast-read;
+               spi-max-frequency = <50000000>;
                spi-rx-bus-width = <4>;
                spi-tx-bus-width = <4>;
                reg = <0>;
        };
 
-       qflash1: flash@1 {
-               compatible = "spansion,m25p80";
+       qflash1: s25fs152a@1 {
+               compatible = "spansion,s25fs512a", "jedec,spi-nor";
                #address-cells = <1>;
                #size-cells = <1>;
-               spi-max-frequency = <20000000>;
+               m25p,fast-read;
+               spi-max-frequency = <50000000>;
                spi-rx-bus-width = <4>;
                spi-tx-bus-width = <4>;
                reg = <1>;
-- 
2.7.4