On Fri, Sep 06, 2019 at 10:33:26AM +0800, Ben Chuang wrote: > From: Ben Chuang <ben.chu...@genesyslogic.com.tw> > > Add support for the GL9750 and GL9755 chipsets. > > Enable v4 mode and wait 5ms after set 1.8V signal enable for GL9750/ > GL9755. Fix the value of SDHCI_MAX_CURRENT register and use the vendor > tuning flow for GL9750. > > Co-developed-by: Michael K Johnson <johns...@danlj.org> > Signed-off-by: Michael K Johnson <johns...@danlj.org> > Signed-off-by: Ben Chuang <ben.chu...@genesyslogic.com.tw> > --- > drivers/mmc/host/Kconfig | 1 + > drivers/mmc/host/Makefile | 2 +- > drivers/mmc/host/sdhci-pci-core.c | 2 + > drivers/mmc/host/sdhci-pci-gli.c | 355 ++++++++++++++++++++++++++++++ > drivers/mmc/host/sdhci-pci.h | 5 + > 5 files changed, 364 insertions(+), 1 deletion(-) > create mode 100644 drivers/mmc/host/sdhci-pci-gli.c > > diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig > index 931770f17087..9fbfff514d6c 100644 > --- a/drivers/mmc/host/Kconfig > +++ b/drivers/mmc/host/Kconfig > @@ -94,6 +94,7 @@ config MMC_SDHCI_PCI > depends on MMC_SDHCI && PCI > select MMC_CQHCI > select IOSF_MBI if X86 > + select MMC_SDHCI_IO_ACCESSORS > help > This selects the PCI Secure Digital Host Controller Interface. > Most controllers found today are PCI devices. > diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile > index 73578718f119..661445415090 100644 > --- a/drivers/mmc/host/Makefile > +++ b/drivers/mmc/host/Makefile > @@ -13,7 +13,7 @@ obj-$(CONFIG_MMC_MXS) += mxs-mmc.o > obj-$(CONFIG_MMC_SDHCI) += sdhci.o > obj-$(CONFIG_MMC_SDHCI_PCI) += sdhci-pci.o > sdhci-pci-y += sdhci-pci-core.o sdhci-pci-o2micro.o > sdhci-pci-arasan.o \ > - sdhci-pci-dwc-mshc.o > + sdhci-pci-dwc-mshc.o sdhci-pci-gli.o > obj-$(subst m,y,$(CONFIG_MMC_SDHCI_PCI)) += sdhci-pci-data.o > obj-$(CONFIG_MMC_SDHCI_ACPI) += sdhci-acpi.o > obj-$(CONFIG_MMC_SDHCI_PXAV3) += sdhci-pxav3.o > diff --git a/drivers/mmc/host/sdhci-pci-core.c > b/drivers/mmc/host/sdhci-pci-core.c > index 4154ee11b47d..e5835fbf73bc 100644 > --- a/drivers/mmc/host/sdhci-pci-core.c > +++ b/drivers/mmc/host/sdhci-pci-core.c > @@ -1682,6 +1682,8 @@ static const struct pci_device_id pci_ids[] = { > SDHCI_PCI_DEVICE(O2, SEABIRD1, o2), > SDHCI_PCI_DEVICE(ARASAN, PHY_EMMC, arasan), > SDHCI_PCI_DEVICE(SYNOPSYS, DWC_MSHC, snps), > + SDHCI_PCI_DEVICE(GLI, 9750, gl9750), > + SDHCI_PCI_DEVICE(GLI, 9755, gl9755), > SDHCI_PCI_DEVICE_CLASS(AMD, SYSTEM_SDHCI, PCI_CLASS_MASK, amd), > /* Generic SD host controller */ > {PCI_DEVICE_CLASS(SYSTEM_SDHCI, PCI_CLASS_MASK)}, > diff --git a/drivers/mmc/host/sdhci-pci-gli.c > b/drivers/mmc/host/sdhci-pci-gli.c > new file mode 100644 > index 000000000000..94462b94abec > --- /dev/null > +++ b/drivers/mmc/host/sdhci-pci-gli.c > @@ -0,0 +1,355 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * Copyright (C) 2019 Genesys Logic, Inc. > + * > + * Authors: Ben Chuang <ben.chu...@genesyslogic.com.tw> > + * > + * Version: v0.9.0 (2019-08-08) > + */ > + > +#include <linux/bitfield.h> > +#include <linux/bits.h> > +#include <linux/pci.h> > +#include <linux/mmc/mmc.h> > +#include <linux/delay.h> > +#include "sdhci.h" > +#include "sdhci-pci.h" > + > +/* Genesys Logic extra registers */ > +#define SDHCI_GLI_9750_WT 0x800 > +#define SDHCI_GLI_9750_WT_EN BIT(0) > +#define GLI_9750_WT_EN_ON 0x1 > +#define GLI_9750_WT_EN_OFF 0x0 > + > +#define SDHCI_GLI_9750_DRIVING 0x860 > +#define SDHCI_GLI_9750_DRIVING_1 GENMASK(11, 0) > +#define SDHCI_GLI_9750_DRIVING_2 GENMASK(27, 26) > +#define GLI_9750_DRIVING_1_VALUE 0xFFF > +#define GLI_9750_DRIVING_2_VALUE 0x3 > + > +#define SDHCI_GLI_9750_PLL 0x864 > +#define SDHCI_GLI_9750_PLL_TX2_INV BIT(23) > +#define SDHCI_GLI_9750_PLL_TX2_DLY GENMASK(22, 20) > +#define GLI_9750_PLL_TX2_INV_VALUE 0x1 > +#define GLI_9750_PLL_TX2_DLY_VALUE 0x0 > + > +#define SDHCI_GLI_9750_SW_CTRL 0x874 > +#define SDHCI_GLI_9750_SW_CTRL_4 GENMASK(7, 6) > +#define GLI_9750_SW_CTRL_4_VALUE 0x3 > + > +#define SDHCI_GLI_9750_MISC 0x878 > +#define SDHCI_GLI_9750_MISC_TX1_INV BIT(2) > +#define SDHCI_GLI_9750_MISC_RX_INV BIT(3) > +#define SDHCI_GLI_9750_MISC_TX1_DLY GENMASK(6, 4) > +#define GLI_9750_MISC_TX1_INV_VALUE 0x0 > +#define GLI_9750_MISC_RX_INV_ON 0x1 > +#define GLI_9750_MISC_RX_INV_OFF 0x0 > +#define GLI_9750_MISC_RX_INV_VALUE GLI_9750_MISC_RX_INV_OFF > +#define GLI_9750_MISC_TX1_DLY_VALUE 0x5 > + > +#define SDHCI_GLI_9750_TUNING_CONTROL 0x540 > +#define SDHCI_GLI_9750_TUNING_CONTROL_EN BIT(4) > +#define GLI_9750_TUNING_CONTROL_EN_ON 0x1 > +#define GLI_9750_TUNING_CONTROL_EN_OFF 0x0 > +#define SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_1 BIT(16) > +#define SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_2 GENMASK(20, 19) > +#define GLI_9750_TUNING_CONTROL_GLITCH_1_VALUE 0x1 > +#define GLI_9750_TUNING_CONTROL_GLITCH_2_VALUE 0x2 > + > +#define SDHCI_GLI_9750_TUNING_PARAMETERS 0x544 > +#define SDHCI_GLI_9750_TUNING_PARAMETERS_RX_DLY GENMASK(2, 0) > +#define GLI_9750_TUNING_PARAMETERS_RX_DLY_VALUE 0x1 > + > +#define GLI_MAX_TUNING_LOOP 40 > + > +/* Genesys Logic chipset */ > +static inline void gl9750_wt_on(struct sdhci_host *host) > +{ > + u32 wt_value; > + u32 wt_enable; > + > + wt_value = sdhci_readl(host, SDHCI_GLI_9750_WT); > + wt_enable = FIELD_GET(SDHCI_GLI_9750_WT_EN, wt_value); > + > + if (wt_enable == GLI_9750_WT_EN_ON) > + return; > + > + wt_value &= ~SDHCI_GLI_9750_WT_EN; > + wt_value |= FIELD_PREP(SDHCI_GLI_9750_WT_EN, GLI_9750_WT_EN_ON); > + > + sdhci_writel(host, wt_value, SDHCI_GLI_9750_WT); > +} > + > +static inline void gl9750_wt_off(struct sdhci_host *host) > +{ > + u32 wt_value; > + u32 wt_enable; > + > + wt_value = sdhci_readl(host, SDHCI_GLI_9750_WT); > + wt_enable = FIELD_GET(SDHCI_GLI_9750_WT_EN, wt_value); > + > + if (wt_enable == GLI_9750_WT_EN_OFF) > + return; > + > + wt_value &= ~SDHCI_GLI_9750_WT_EN; > + wt_value |= FIELD_PREP(SDHCI_GLI_9750_WT_EN, GLI_9750_WT_EN_OFF); > + > + sdhci_writel(host, wt_value, SDHCI_GLI_9750_WT); > +} > + > +static void gli_set_9750(struct sdhci_host *host) > +{ > + u32 driving_value; > + u32 pll_value; > + u32 sw_ctrl_value; > + u32 misc_value; > + u32 parameter_value; > + u32 control_value; > + u16 ctrl2; > + > + gl9750_wt_on(host); > + > + driving_value = sdhci_readl(host, SDHCI_GLI_9750_DRIVING); > + pll_value = sdhci_readl(host, SDHCI_GLI_9750_PLL); > + sw_ctrl_value = sdhci_readl(host, SDHCI_GLI_9750_SW_CTRL); > + misc_value = sdhci_readl(host, SDHCI_GLI_9750_MISC); > + parameter_value = sdhci_readl(host, SDHCI_GLI_9750_TUNING_PARAMETERS); > + control_value = sdhci_readl(host, SDHCI_GLI_9750_TUNING_CONTROL); > + > + driving_value &= ~(SDHCI_GLI_9750_DRIVING_1); > + driving_value &= ~(SDHCI_GLI_9750_DRIVING_2); > + driving_value |= FIELD_PREP(SDHCI_GLI_9750_DRIVING_1, > + GLI_9750_DRIVING_1_VALUE); > + driving_value |= FIELD_PREP(SDHCI_GLI_9750_DRIVING_2, > + GLI_9750_DRIVING_2_VALUE); > + sdhci_writel(host, driving_value, SDHCI_GLI_9750_DRIVING); > + > + sw_ctrl_value &= ~SDHCI_GLI_9750_SW_CTRL_4; > + sw_ctrl_value |= FIELD_PREP(SDHCI_GLI_9750_SW_CTRL_4, > + GLI_9750_SW_CTRL_4_VALUE); > + sdhci_writel(host, sw_ctrl_value, SDHCI_GLI_9750_SW_CTRL); > + > + /* reset the tuning flow after reinit and before starting tuning */ > + pll_value &= ~SDHCI_GLI_9750_PLL_TX2_INV; > + pll_value &= ~SDHCI_GLI_9750_PLL_TX2_DLY; > + pll_value |= FIELD_PREP(SDHCI_GLI_9750_PLL_TX2_INV, > + GLI_9750_PLL_TX2_INV_VALUE); > + pll_value |= FIELD_PREP(SDHCI_GLI_9750_PLL_TX2_DLY, > + GLI_9750_PLL_TX2_DLY_VALUE); > + > + misc_value &= ~SDHCI_GLI_9750_MISC_TX1_INV; > + misc_value &= ~SDHCI_GLI_9750_MISC_RX_INV; > + misc_value &= ~SDHCI_GLI_9750_MISC_TX1_DLY; > + misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_TX1_INV, > + GLI_9750_MISC_TX1_INV_VALUE); > + misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_RX_INV, > + GLI_9750_MISC_RX_INV_VALUE); > + misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_TX1_DLY, > + GLI_9750_MISC_TX1_DLY_VALUE); > + > + parameter_value &= ~SDHCI_GLI_9750_TUNING_PARAMETERS_RX_DLY; > + parameter_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_PARAMETERS_RX_DLY, > + GLI_9750_TUNING_PARAMETERS_RX_DLY_VALUE); > + > + control_value &= ~SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_1; > + control_value &= ~SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_2; > + control_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_1, > + GLI_9750_TUNING_CONTROL_GLITCH_1_VALUE); > + control_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_2, > + GLI_9750_TUNING_CONTROL_GLITCH_2_VALUE); > + > + sdhci_writel(host, pll_value, SDHCI_GLI_9750_PLL); > + sdhci_writel(host, misc_value, SDHCI_GLI_9750_MISC); > + > + /* disable tuned clk */ > + ctrl2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); > + ctrl2 &= ~SDHCI_CTRL_TUNED_CLK; > + sdhci_writew(host, ctrl2, SDHCI_HOST_CONTROL2); > + > + /* enable tuning parameters control */ > + control_value &= ~SDHCI_GLI_9750_TUNING_CONTROL_EN; > + control_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_CONTROL_EN, > + GLI_9750_TUNING_CONTROL_EN_ON); > + sdhci_writel(host, control_value, SDHCI_GLI_9750_TUNING_CONTROL); > + > + /* write tuning parameters */ > + sdhci_writel(host, parameter_value, SDHCI_GLI_9750_TUNING_PARAMETERS); > + > + /* disable tuning parameters control */ > + control_value &= ~SDHCI_GLI_9750_TUNING_CONTROL_EN; > + control_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_CONTROL_EN, > + GLI_9750_TUNING_CONTROL_EN_OFF); > + sdhci_writel(host, control_value, SDHCI_GLI_9750_TUNING_CONTROL); > + > + /* clear tuned clk */ > + ctrl2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); > + ctrl2 &= ~SDHCI_CTRL_TUNED_CLK; > + sdhci_writew(host, ctrl2, SDHCI_HOST_CONTROL2); > + > + gl9750_wt_off(host); > +} > + > +static void gli_set_9750_rx_inv(struct sdhci_host *host, bool b) > +{ > + u32 misc_value; > + > + gl9750_wt_on(host); > + > + misc_value = sdhci_readl(host, SDHCI_GLI_9750_MISC); > + if (b) { > + misc_value &= ~SDHCI_GLI_9750_MISC_RX_INV;
The above statement can be moved outside the if. > + misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_RX_INV, > + GLI_9750_MISC_RX_INV_ON); > + sdhci_writel(host, misc_value, SDHCI_GLI_9750_MISC); Can be moved outside the if. [ maybe that was discussed; if so please ignore ] > + } else { > + misc_value &= ~SDHCI_GLI_9750_MISC_RX_INV; > + misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_RX_INV, > + GLI_9750_MISC_RX_INV_OFF); > + sdhci_writel(host, misc_value, SDHCI_GLI_9750_MISC); > + } > + > + gl9750_wt_off(host); > +} > + > +static int __sdhci_execute_tuning_9750(struct sdhci_host *host, u32 opcode) > +{ > + int i; > + int rx_inv; > + > + for (rx_inv = 0; rx_inv < 2; rx_inv++) { > + gli_set_9750_rx_inv(host, !!rx_inv); > + sdhci_start_tuning(host); > + > + for (i = 0; i < GLI_MAX_TUNING_LOOP; i++) { > + u16 ctrl; > + > + sdhci_send_tuning(host, opcode); > + > + if (!host->tuning_done) { > + sdhci_abort_tuning(host, opcode); > + break; > + } > + > + ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2); > + if (!(ctrl & SDHCI_CTRL_EXEC_TUNING)) { > + if (ctrl & SDHCI_CTRL_TUNED_CLK) > + return 0; /* Success! */ > + break; > + } > + } > + } > + if (!host->tuning_done) { > + pr_info("%s: Tuning timeout, falling back to fixed sampling > clock\n", > + mmc_hostname(host->mmc)); > + return -ETIMEDOUT; > + } > + > + pr_info("%s: Tuning failed, falling back to fixed sampling clock\n", > + mmc_hostname(host->mmc)); > + sdhci_reset_tuning(host); > + > + return -EAGAIN; > +} > + > +static int gl9750_execute_tuning(struct sdhci_host *host, u32 opcode) > +{ > + host->mmc->retune_period = 0; > + if (host->tuning_mode == SDHCI_TUNING_MODE_1) > + host->mmc->retune_period = host->tuning_count; > + > + gli_set_9750(host); > + host->tuning_err = __sdhci_execute_tuning_9750(host, opcode); > + sdhci_end_tuning(host); > + > + return 0; > +} > + > +static int gli_probe_slot_gl9750(struct sdhci_pci_slot *slot) > +{ > + struct sdhci_host *host = slot->host; > + > + slot->host->mmc->caps2 |= MMC_CAP2_NO_SDIO; > + sdhci_enable_v4_mode(host); > + > + return 0; > +} > + > +static int gli_probe_slot_gl9755(struct sdhci_pci_slot *slot) > +{ > + struct sdhci_host *host = slot->host; > + > + slot->host->mmc->caps2 |= MMC_CAP2_NO_SDIO; > + sdhci_enable_v4_mode(host); > + > + return 0; > +} > + > +static void sdhci_gli_voltage_switch(struct sdhci_host *host) > +{ > + /* > + * Accroding to Section 3.6.1 signal voltage switch procedure in According > + * SD Host Controller Simplified Spec. 4.20, the step 6~8 are the s/the step/steps/ "as follows", maybe, instead of "the following" ? > + * following: > + * (6) Set 1.8V Signal Enable in the Host Control 2 register. > + * (7) Wait 5ms. 1.8V voltage regulator shall be stable within this > + * period. > + * (8) If 1.8V Signal Enable is cleared by Host Controller, go to > + * step (12). > + * > + * Wait 5ms after set 1.8V signal enable in Host Control 2 register > + * to ensure 1.8V signal enable bit is set by GL9750/GL9755. > + */ > + usleep_range(5000, 5500); > +} > + > +static void sdhci_gl9750_reset(struct sdhci_host *host, u8 mask) > +{ > + sdhci_reset(host, mask); > + gli_set_9750(host); > +} > + > +static u32 sdhci_gl9750_readl(struct sdhci_host *host, int reg) > +{ > + u32 value; > + > + value = readl(host->ioaddr + reg); > + if (unlikely(reg == SDHCI_MAX_CURRENT && !(value & 0xff))) > + value |= 0xc8; > + > + return value; > +} > + > +static const struct sdhci_ops sdhci_gl9755_ops = { > + .set_clock = sdhci_set_clock, > + .enable_dma = sdhci_pci_enable_dma, > + .set_bus_width = sdhci_set_bus_width, > + .reset = sdhci_reset, > + .set_uhs_signaling = sdhci_set_uhs_signaling, > + .voltage_switch = sdhci_gli_voltage_switch, > +}; > + > +const struct sdhci_pci_fixes sdhci_gl9755 = { > + .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC, > + .quirks2 = SDHCI_QUIRK2_BROKEN_DDR50, > + .probe_slot = gli_probe_slot_gl9755, > + .ops = &sdhci_gl9755_ops, > +}; > + > +static const struct sdhci_ops sdhci_gl9750_ops = { > + .read_l = sdhci_gl9750_readl, > + .set_clock = sdhci_set_clock, > + .enable_dma = sdhci_pci_enable_dma, > + .set_bus_width = sdhci_set_bus_width, > + .reset = sdhci_gl9750_reset, > + .set_uhs_signaling = sdhci_set_uhs_signaling, > + .voltage_switch = sdhci_gli_voltage_switch, > + .platform_execute_tuning = gl9750_execute_tuning, > +}; > + > +const struct sdhci_pci_fixes sdhci_gl9750 = { > + .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC, > + .quirks2 = SDHCI_QUIRK2_BROKEN_DDR50, > + .probe_slot = gli_probe_slot_gl9750, > + .ops = &sdhci_gl9750_ops, > +}; > + > diff --git a/drivers/mmc/host/sdhci-pci.h b/drivers/mmc/host/sdhci-pci.h > index e5dc6e44c7a4..738ba5afcc20 100644 > --- a/drivers/mmc/host/sdhci-pci.h > +++ b/drivers/mmc/host/sdhci-pci.h > @@ -65,6 +65,9 @@ > > #define PCI_DEVICE_ID_SYNOPSYS_DWC_MSHC 0xc202 > > +#define PCI_DEVICE_ID_GLI_9755 0x9755 > +#define PCI_DEVICE_ID_GLI_9750 0x9750 > + > /* > * PCI device class and mask > */ > @@ -185,5 +188,7 @@ int sdhci_pci_enable_dma(struct sdhci_host *host); > extern const struct sdhci_pci_fixes sdhci_arasan; > extern const struct sdhci_pci_fixes sdhci_snps; > extern const struct sdhci_pci_fixes sdhci_o2; > +extern const struct sdhci_pci_fixes sdhci_gl9750; > +extern const struct sdhci_pci_fixes sdhci_gl9755; > > #endif /* __SDHCI_PCI_H */