[PATCH 5.2 39/85] Revert "rt2800: enable TX_PIN_CFG_LNA_PE_ bits per band"

[Greg Kroah-Hartman]

From: Stanislaw Gruszka <sgrus...@redhat.com>

commit 13fa451568ab9e8b3074ef741477c7938c713c42 upstream.

This reverts commit 9ad3b55654455258a9463384edb40077439d879f.

As reported by Sergey:

"I got some problem after upgrade kernel to 5.2 version (debian testing
linux-image-5.2.0-2-amd64). 5Ghz client  stopped to see AP.
Some tests with 1metre distance between client-AP: 2.4Ghz  -22dBm, for
5Ghz - 53dBm !, for longer distance (8m + walls) 2.4 - 61dBm, 5Ghz not
visible."

It was identified that rx signal level degradation was caused by
9ad3b5565445 ("rt2800: enable TX_PIN_CFG_LNA_PE_ bits per band").
So revert this commit.

Cc: <sta...@vger.kernel.org> # v5.1+
Reported-and-tested-by: Sergey Maranchuk <slav0n...@gmail.com>
Signed-off-by: Stanislaw Gruszka <sgrus...@redhat.com>
Signed-off-by: Kalle Valo <kv...@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gre...@linuxfoundation.org>

---
 drivers/net/wireless/ralink/rt2x00/rt2800lib.c |   18 ++++++------------
 1 file changed, 6 insertions(+), 12 deletions(-)

--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
@@ -4156,24 +4156,18 @@ static void rt2800_config_channel(struct
        switch (rt2x00dev->default_ant.rx_chain_num) {
        case 3:
                /* Turn on tertiary LNAs */
-               rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A2_EN,
-                                  rf->channel > 14);
-               rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G2_EN,
-                                  rf->channel <= 14);
+               rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A2_EN, 1);
+               rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G2_EN, 1);
                /* fall-through */
        case 2:
                /* Turn on secondary LNAs */
-               rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN,
-                                  rf->channel > 14);
-               rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN,
-                                  rf->channel <= 14);
+               rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 1);
+               rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 1);
                /* fall-through */
        case 1:
                /* Turn on primary LNAs */
-               rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A0_EN,
-                                  rf->channel > 14);
-               rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G0_EN,
-                                  rf->channel <= 14);
+               rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A0_EN, 1);
+               rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G0_EN, 1);
                break;
        }