"Naveen N. Rao" <naveen.n....@linux.vnet.ibm.com> writes:
> Michael Ellerman wrote:
>> "Gautham R. Shenoy" <e...@linux.vnet.ibm.com> writes:
>>> From: "Gautham R. Shenoy" <e...@linux.vnet.ibm.com>
>>>
>>> Currently on Pseries Linux Guests, the offlined CPU can be put to one
>>> of the following two states:
>>> - Long term processor cede (also called extended cede)
>>> - Returned to the Hypervisor via RTAS "stop-self" call.
>>>
>>> This is controlled by the kernel boot parameter "cede_offline=on/off".
>>>
>>> By default the offlined CPUs enter extended cede.
>>
>> Since commit 3aa565f53c39 ("powerpc/pseries: Add hooks to put the CPU into
>> an appropriate offline state") (Nov 2009)
>>
>> Which you wrote :)
>>
>> Why was that wrong?
>>
>>> The PHYP hypervisor considers CPUs in extended cede to be "active"
>>> since the CPUs are still under the control fo the Linux Guests. Hence, when
>>> we change the
>>> SMT modes by offlining the secondary CPUs, the PURR and the RWMR SPRs
>>> will continue to count the values for offlined CPUs in extended cede
>>> as if they are online.
>>>
>>> One of the expectations with PURR is that the for an interval of time,
>>> the sum of the PURR increments across the online CPUs of a core should
>>> equal the number of timebase ticks for that interval.
>>>
>>> This is currently not the case.
>>
>> But why does that matter? It's just some accounting stuff, does it
>> actually break something meaningful?
>
> Yes, this broke lparstat at the very least (though its quite unfortunate
> we took so long to notice).
By "so long" you mean 10 years?
Also I've never heard of lparstat, but I assume it's one of these tools
that's meant to behave like the AIX equivalent?
If it's been "broken" for 10 years and no one noticed, I'd argue the
current behaviour is now "correct" and fixing it would actually be a
breakage :)
> With SMT disabled, and under load:
> $ sudo lparstat 1 10
>
> System Configuration
> type=Shared mode=Uncapped smt=Off lcpu=2 mem=7759616 kB cpus=6 ent=1.00
>
> %user %sys %wait %idle physc %entc lbusy vcsw phint
> ----- ----- ----- ----- ----- ----- ----- ----- -----
> 100.00 0.00 0.00 0.00 1.10 110.00 100.00 128784460 0
> 100.00 0.00 0.00 0.00 1.07 107.00 100.00 128784860 0
> 100.00 0.00 0.00 0.00 1.07 107.00 100.00 128785260 0
> 100.00 0.00 0.00 0.00 1.07 107.00 100.00 128785662 0
> 100.00 0.00 0.00 0.00 1.07 107.00 100.00 128786062 0
> 100.00 0.00 0.00 0.00 1.07 107.00 100.00 128786462 0
> 100.00 0.00 0.00 0.00 1.07 107.00 100.00 128786862 0
> 100.00 0.00 0.00 0.00 1.07 107.00 100.00 128787262 0
> 100.00 0.00 0.00 0.00 1.07 107.00 100.00 128787664 0
> 100.00 0.00 0.00 0.00 1.07 107.00 100.00 128788064 0
What about that is wrong?
> With cede_offline=off:
> $ sudo lparstat 1 10
>
> System Configuration
> type=Shared mode=Uncapped smt=Off lcpu=2 mem=7759616 kB cpus=6 ent=1.00
>
> %user %sys %wait %idle physc %entc lbusy vcsw phint
> ----- ----- ----- ----- ----- ----- ----- ----- -----
> 100.00 0.00 0.00 0.00 1.94 194.00 100.00 128961588 0
> 100.00 0.00 0.00 0.00 1.91 191.00 100.00 128961988 0
> 100.00 0.00 0.00 0.00 inf inf 100.00 128962392 0
> 100.00 0.00 0.00 0.00 1.91 191.00 100.00 128962792 0
> 100.00 0.00 0.00 0.00 1.91 191.00 100.00 128963192 0
> 100.00 0.00 0.00 0.00 1.91 191.00 100.00 128963592 0
> 100.00 0.00 0.00 0.00 1.91 191.00 100.00 128963992 0
> 100.00 0.00 0.00 0.00 1.91 191.00 100.00 128964392 0
> 100.00 0.00 0.00 0.00 1.91 191.00 100.00 128964792 0
> 100.00 0.00 0.00 0.00 1.91 191.00 100.00 128965194 0
>
> [The 'inf' values there show a different bug]
>
> Also, since we expose [S]PURR through sysfs, any tools that make use of
> that directly are also affected due to this.
But again if we've had the current behaviour for 10 years then arguably
that's now the correct behaviour.
cheers
