Register upper-lower interrupts for each of the two tsens controllers. Signed-off-by: Amit Kucheria <amit.kuche...@linaro.org> --- arch/arm64/boot/dts/qcom/msm8996.dtsi | 60 ++++++++++++++------------- 1 file changed, 32 insertions(+), 28 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 96c0a481f454..bb763b362c16 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -175,8 +175,8 @@ thermal-zones { cpu0-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; + polling-delay-passive = <0>; + polling-delay = <0>; thermal-sensors = <&tsens0 3>; @@ -196,8 +196,8 @@ }; cpu1-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; + polling-delay-passive = <0>; + polling-delay = <0>; thermal-sensors = <&tsens0 5>; @@ -217,8 +217,8 @@ }; cpu2-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; + polling-delay-passive = <0>; + polling-delay = <0>; thermal-sensors = <&tsens0 8>; @@ -238,8 +238,8 @@ }; cpu3-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; + polling-delay-passive = <0>; + polling-delay = <0>; thermal-sensors = <&tsens0 10>; @@ -259,8 +259,8 @@ }; gpu-thermal-top { - polling-delay-passive = <250>; - polling-delay = <1000>; + polling-delay-passive = <0>; + polling-delay = <0>; thermal-sensors = <&tsens1 6>; @@ -274,8 +274,8 @@ }; gpu-thermal-bottom { - polling-delay-passive = <250>; - polling-delay = <1000>; + polling-delay-passive = <0>; + polling-delay = <0>; thermal-sensors = <&tsens1 7>; @@ -289,8 +289,8 @@ }; m4m-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; + polling-delay-passive = <0>; + polling-delay = <0>; thermal-sensors = <&tsens0 1>; @@ -304,8 +304,8 @@ }; l3-or-venus-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; + polling-delay-passive = <0>; + polling-delay = <0>; thermal-sensors = <&tsens0 2>; @@ -319,8 +319,8 @@ }; cluster0-l2-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; + polling-delay-passive = <0>; + polling-delay = <0>; thermal-sensors = <&tsens0 7>; @@ -334,8 +334,8 @@ }; cluster1-l2-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; + polling-delay-passive = <0>; + polling-delay = <0>; thermal-sensors = <&tsens0 12>; @@ -349,8 +349,8 @@ }; camera-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; + polling-delay-passive = <0>; + polling-delay = <0>; thermal-sensors = <&tsens1 1>; @@ -364,8 +364,8 @@ }; q6-dsp-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; + polling-delay-passive = <0>; + polling-delay = <0>; thermal-sensors = <&tsens1 2>; @@ -379,8 +379,8 @@ }; mem-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; + polling-delay-passive = <0>; + polling-delay = <0>; thermal-sensors = <&tsens1 3>; @@ -394,8 +394,8 @@ }; modemtx-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; + polling-delay-passive = <0>; + polling-delay = <0>; thermal-sensors = <&tsens1 4>; @@ -591,6 +591,8 @@ reg = <0x4a9000 0x1000>, /* TM */ <0x4a8000 0x1000>; /* SROT */ #qcom,sensors = <13>; + interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow"; #thermal-sensor-cells = <1>; }; @@ -599,6 +601,8 @@ reg = <0x4ad000 0x1000>, /* TM */ <0x4ac000 0x1000>; /* SROT */ #qcom,sensors = <8>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow"; #thermal-sensor-cells = <1>; }; -- 2.17.1