On Mon, 2019-09-23 at 09:24 +0000, Andy Tang wrote: > Hi Rui, Edubezval, > > Would you please review this patch? > CC Anson Huang. I'd prefer all the qoriq thermal patches go through his review first.
thanks, rui > BR, > Andy > > > -----Original Message----- > > From: Andy Tang > > Sent: 2019年8月29日 16:38 > > To: 'edubez...@gmail.com' <edubez...@gmail.com>; > > 'rui.zh...@intel.com' > > <rui.zh...@intel.com> > > Cc: 'daniel.lezc...@linaro.org' <daniel.lezc...@linaro.org>; Leo Li > > <leoyang...@nxp.com>; 'linux...@vger.kernel.org' > > <linux...@vger.kernel.org>; 'linux-kernel@vger.kernel.org' > > <linux-kernel@vger.kernel.org> > > Subject: RE: [PATCH] thermal: qoriq: add thermal monitor unit > > version 2 > > support > > > > Hi Rui, Edubezval, > > > > Almost three monthes passed, I have not got your comments from you. > > Could you please take a look at this patch? > > > > BR, > > Andy > > > > > -----Original Message----- > > > From: Andy Tang > > > Sent: 2019年8月6日 10:57 > > > To: edubez...@gmail.com; rui.zh...@intel.com > > > Cc: daniel.lezc...@linaro.org; Leo Li <leoyang...@nxp.com>; > > > linux...@vger.kernel.org; linux-kernel@vger.kernel.org > > > Subject: RE: [PATCH] thermal: qoriq: add thermal monitor unit > > > version > > > 2 support > > > > > > Any comments? > > > > > > BR, > > > Andy > > > > > > > -----Original Message----- > > > > From: Yuantian Tang <andy.t...@nxp.com> > > > > Sent: 2019年6月4日 10:51 > > > > To: edubez...@gmail.com; rui.zh...@intel.com > > > > Cc: daniel.lezc...@linaro.org; Leo Li <leoyang...@nxp.com>; > > > > linux...@vger.kernel.org; linux-kernel@vger.kernel.org; Andy > > > > Tang > > > > <andy.t...@nxp.com> > > > > Subject: [PATCH] thermal: qoriq: add thermal monitor unit > > > > version 2 > > > > support > > > > > > > > Thermal Monitor Unit v2 is introduced on new Layscape SoC. > > > > Compared to v1, TMUv2 has a little different register layout > > > > and > > > > digital output is fairly linear. > > > > > > > > Signed-off-by: Yuantian Tang <andy.t...@nxp.com> > > > > --- > > > > drivers/thermal/qoriq_thermal.c | 122 > > > > +++++++++++++++++++++++++------- > > > > 1 file changed, 98 insertions(+), 24 deletions(-) > > > > > > > > diff --git a/drivers/thermal/qoriq_thermal.c > > > > b/drivers/thermal/qoriq_thermal.c index > > > > 3b5f5b3fb1bc..0df6dfddf804 > > > > 100644 > > > > --- a/drivers/thermal/qoriq_thermal.c > > > > +++ b/drivers/thermal/qoriq_thermal.c > > > > @@ -13,6 +13,15 @@ > > > > #include "thermal_core.h" > > > > > > > > #define SITES_MAX 16 > > > > +#define TMR_DISABLE 0x0 > > > > +#define TMR_ME 0x80000000 > > > > +#define TMR_ALPF 0x0c000000 > > > > +#define TMR_ALPF_V2 0x03000000 > > > > +#define TMTMIR_DEFAULT 0x0000000f > > > > +#define TIER_DISABLE 0x0 > > > > +#define TEUMR0_V2 0x51009C00 > > > > +#define TMU_VER1 0x1 > > > > +#define TMU_VER2 0x2 > > > > > > > > /* > > > > * QorIQ TMU Registers > > > > @@ -23,17 +32,55 @@ struct qoriq_tmu_site_regs { > > > > u8 res0[0x8]; > > > > }; > > > > > > > > -struct qoriq_tmu_regs { > > > > +struct qoriq_tmu_regs_v2 { > > > > + u32 tmr; /* Mode Register */ > > > > + u32 tsr; /* Status Register */ > > > > + u32 tmsr; /* monitor site register */ > > > > + u32 tmtmir; /* Temperature measurement > > > > interval Register > > > > */ > > > > + u8 res0[0x10]; > > > > + u32 tier; /* Interrupt Enable Register */ > > > > + u32 tidr; /* Interrupt Detect Register */ > > > > + u8 res1[0x8]; > > > > + u32 tiiscr; /* interrupt immediate site > > > > capture register */ > > > > + u32 tiascr; /* interrupt average site > > > > capture register */ > > > > + u32 ticscr; /* Interrupt Critical Site > > > > Capture Register */ > > > > + u32 res2; > > > > + u32 tmhtcr; /* monitor high temperature > > > > capture register */ > > > > + u32 tmltcr; /* monitor low temperature > > > > capture register */ > > > > + u32 tmrtrcr; /* monitor rising temperature rate > > > > capture register > > > > */ > > > > + u32 tmftrcr; /* monitor falling temperature rate > > > > capture register > > > > */ > > > > + u32 tmhtitr; /* High Temperature Immediate Threshold > > > > */ > > > > + u32 tmhtatr; /* High Temperature Average Threshold > > > > */ > > > > + u32 tmhtactr; /* High Temperature Average Crit > > > > Threshold */ > > > > + u32 res3; > > > > + u32 tmltitr; /* monitor low temperature immediate > > > > threshold */ > > > > + u32 tmltatr; /* monitor low temperature average > > > > threshold > > > > register */ > > > > + u32 tmltactr; /* monitor low temperature average > > > > critical > > > > threshold */ > > > > + u32 res4; > > > > + u32 tmrtrctr; /* monitor rising temperature rate > > > > critical threshold > > > > */ > > > > + u32 tmftrctr; /* monitor falling temperature rate > > > > critical > > > > threshold*/ > > > > + u8 res5[0x8]; > > > > + u32 ttcfgr; /* Temperature Configuration Register > > > > */ > > > > + u32 tscfgr; /* Sensor Configuration Register */ > > > > + u8 res6[0x78]; > > > > + struct qoriq_tmu_site_regs site[SITES_MAX]; > > > > + u8 res7[0x9f8]; > > > > + u32 ipbrr0; /* IP Block Revision Register 0 > > > > */ > > > > + u32 ipbrr1; /* IP Block Revision Register 1 > > > > */ > > > > + u8 res8[0x300]; > > > > + u32 teumr0; > > > > + u32 teumr1; > > > > + u32 teumr2; > > > > + u32 res9; > > > > + u32 ttrcr[4]; /* Temperature Range Control Register > > > > */ > > > > +}; > > > > + > > > > +struct qoriq_tmu_regs_v1 { > > > > u32 tmr; /* Mode Register */ > > > > -#define TMR_DISABLE 0x0 > > > > -#define TMR_ME 0x80000000 > > > > -#define TMR_ALPF 0x0c000000 > > > > u32 tsr; /* Status Register */ > > > > u32 tmtmir; /* Temperature measurement > > > > interval Register > > > > */ > > > > -#define TMTMIR_DEFAULT 0x0000000f > > > > u8 res0[0x14]; > > > > u32 tier; /* Interrupt Enable Register */ > > > > -#define TIER_DISABLE 0x0 > > > > u32 tidr; /* Interrupt Detect Register */ > > > > u32 tiscr; /* Interrupt Site Capture > > > > Register */ > > > > u32 ticscr; /* Interrupt Critical Site > > > > Capture Register */ > > > > @@ -53,10 +100,7 @@ struct qoriq_tmu_regs { > > > > u32 ipbrr0; /* IP Block Revision Register 0 > > > > */ > > > > u32 ipbrr1; /* IP Block Revision Register 1 > > > > */ > > > > u8 res6[0x310]; > > > > - u32 ttr0cr; /* Temperature Range 0 Control > > > > Register */ > > > > - u32 ttr1cr; /* Temperature Range 1 Control > > > > Register */ > > > > - u32 ttr2cr; /* Temperature Range 2 Control > > > > Register */ > > > > - u32 ttr3cr; /* Temperature Range 3 Control > > > > Register */ > > > > + u32 ttrcr[4]; /* Temperature Range Control > > > > Register */ > > > > }; > > > > > > > > struct qoriq_tmu_data; > > > > @@ -71,7 +115,9 @@ struct qoriq_sensor { }; > > > > > > > > struct qoriq_tmu_data { > > > > - struct qoriq_tmu_regs __iomem *regs; > > > > + int ver; > > > > + struct qoriq_tmu_regs_v1 __iomem *regs; > > > > + struct qoriq_tmu_regs_v2 __iomem *regv2; > > > > bool little_endian; > > > > struct qoriq_sensor *sensor[SITES_MAX]; > > > > }; > > > > @@ -111,7 +157,7 @@ static const struct > > > > thermal_zone_of_device_ops > > > > tmu_tz_ops = { static int qoriq_tmu_register_tmu_zone(struct > > > > platform_device *pdev) { > > > > struct qoriq_tmu_data *qdata = > > > > platform_get_drvdata(pdev); > > > > - int id, sites = 0; > > > > + int id, sites = 0, sv2 = 0; > > > > > > > > for (id = 0; id < SITES_MAX; id++) { > > > > qdata->sensor[id] = devm_kzalloc(&pdev->dev, @@ > > > > -130,12 > > > > +176,24 @@ static int qoriq_tmu_register_tmu_zone(struct > > > > +platform_device > > > > *pdev) > > > > return PTR_ERR(qdata- > > > > >sensor[id]->tzd); > > > > } > > > > > > > > - sites |= 0x1 << (15 - id); > > > > + if (qdata->ver == TMU_VER1) > > > > + sites |= 0x1 << (15 - id); > > > > + else > > > > + sv2 |= 0x1 << id; > > > > } > > > > > > > > /* Enable monitoring */ > > > > - if (sites != 0) > > > > - tmu_write(qdata, sites | TMR_ME | TMR_ALPF, > > > > &qdata->regs->tmr); > > > > + if (qdata->ver == TMU_VER1) { > > > > + if (sites != 0) > > > > + tmu_write(qdata, sites | TMR_ME | > > > > TMR_ALPF, > > > > + &qdata->regs->tmr); > > > > + } else { > > > > + if (sv2 != 0) { > > > > + tmu_write(qdata, sv2, &qdata->regv2- > > > > >tmsr); > > > > + tmu_write(qdata, TMR_ME | TMR_ALPF_V2, > > > > + &qdata->regv2->tmr); > > > > + } > > > > + } > > > > > > > > return 0; > > > > } > > > > @@ -148,16 +206,20 @@ static int qoriq_tmu_calibration(struct > > > > platform_device *pdev) > > > > struct device_node *np = pdev->dev.of_node; > > > > struct qoriq_tmu_data *data = > > > > platform_get_drvdata(pdev); > > > > > > > > - if (of_property_read_u32_array(np, "fsl,tmu-range", > > > > range, 4)) { > > > > - dev_err(&pdev->dev, "missing calibration > > > > range.\n"); > > > > - return -ENODEV; > > > > + len = of_property_count_u32_elems(np, "fsl,tmu-range"); > > > > + if (len == -ENODATA || len == -EINVAL || len > 4) { > > > > + dev_err(&pdev->dev, "invalid range data.\n"); > > > > + return len; > > > > } > > > > > > > > - /* Init temperature range registers */ > > > > - tmu_write(data, range[0], &data->regs->ttr0cr); > > > > - tmu_write(data, range[1], &data->regs->ttr1cr); > > > > - tmu_write(data, range[2], &data->regs->ttr2cr); > > > > - tmu_write(data, range[3], &data->regs->ttr3cr); > > > > + val = of_property_read_u32_array(np, "fsl,tmu-range", > > > > range, len); > > > > + if (val != 0) { > > > > + dev_err(&pdev->dev, "invalid range data.\n"); > > > > + return val; > > > > + } > > > > + > > > > + for (i = 0; i < len; i++) > > > > + tmu_write(data, range[i], &data->regs- > > > > >ttrcr[i]); > > > > > > > > calibration = of_get_property(np, "fsl,tmu- > > > > calibration", &len); > > > > if (calibration == NULL || len % 8) { @@ -181,7 +243,12 > > > > @@ static > > > > void qoriq_tmu_init_device(struct qoriq_tmu_data *data) > > > > tmu_write(data, TIER_DISABLE, &data->regs->tier); > > > > > > > > /* Set update_interval */ > > > > - tmu_write(data, TMTMIR_DEFAULT, &data->regs->tmtmir); > > > > + if (data->ver == TMU_VER1) { > > > > + tmu_write(data, TMTMIR_DEFAULT, &data->regs- > > > > >tmtmir); > > > > + } else { > > > > + tmu_write(data, TMTMIR_DEFAULT, &data->regv2- > > > > >tmtmir); > > > > + tmu_write(data, TEUMR0_V2, &data->regv2- > > > > >teumr0); > > > > + } > > > > > > > > /* Disable monitoring */ > > > > tmu_write(data, TMR_DISABLE, &data->regs->tmr); @@ > > > > -190,6 > > > > +257,7 > > > @@ > > > > static void qoriq_tmu_init_device(struct qoriq_tmu_data *data) > > > > static int qoriq_tmu_probe(struct platform_device *pdev) { > > > > int ret; > > > > + u32 ver; > > > > struct qoriq_tmu_data *data; > > > > struct device_node *np = pdev->dev.of_node; > > > > > > > > @@ -214,6 +282,12 @@ static int qoriq_tmu_probe(struct > > > > > > platform_device > > > > *pdev) > > > > goto err_iomap; > > > > } > > > > > > > > + /* version register offset at: 0xbf8 on both v1 and v2 > > > > */ > > > > + ver = tmu_read(data, &data->regs->ipbrr0); > > > > + data->ver = (ver >> 8) & 0xff; > > > > + if (data->ver == TMU_VER2) > > > > + data->regv2 = (void __iomem *)data->regs; > > > > + > > > > qoriq_tmu_init_device(data); /* TMU initialization > > > > */ > > > > > > > > ret = qoriq_tmu_calibration(pdev); /* TMU > > > > calibration */ > > > > -- > > > > 2.17.1 > >