The purpose of this patchset is to add the sm1 support to the amlogic audio clock controller. The line count is lot higher than what I hoped for. Even if extremely similar, there is a shift in the register address on the sm1 which makes a bit of a mess.
I could have patched the address on the fly if running on sm1 but the end result did not save much lines and would have been a pain to maintain and scale in the future Instead I choose to re-arrange the driver to share the macros and declare separate clocks for the clock which have changed. Jerome Brunet (7): dt-bindings: clk: axg-audio: add sm1 bindings dt-bindings: clock: meson: add sm1 resets to the axg-audio controller clk: meson: axg-audio: remove useless defines clk: meson: axg-audio: fix regmap last register clk: meson: axg-audio: prepare sm1 addition clk: meson: axg-audio: provide clk top signal name clk: meson: axg_audio: add sm1 support .../bindings/clock/amlogic,axg-audio-clkc.txt | 3 +- drivers/clk/meson/axg-audio.c | 2021 +++++++++++------ drivers/clk/meson/axg-audio.h | 21 +- include/dt-bindings/clock/axg-audio-clkc.h | 10 + .../reset/amlogic,meson-g12a-audio-reset.h | 15 + 5 files changed, 1373 insertions(+), 697 deletions(-) -- 2.21.0
