The AXI SPI engine driver uses the `delay_usecs` field from `spi_transfer` to configure delays, which the controller will execute. This change extends the logic to also include the `delay` value, in case it is used (instead if `delay_usecs`).
Signed-off-by: Alexandru Ardelean <[email protected]> --- drivers/spi/spi-axi-spi-engine.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) diff --git a/drivers/spi/spi-axi-spi-engine.c b/drivers/spi/spi-axi-spi-engine.c index 3b1833e6c7ad..111d3b83285f 100644 --- a/drivers/spi/spi-axi-spi-engine.c +++ b/drivers/spi/spi-axi-spi-engine.c @@ -163,10 +163,21 @@ static void spi_engine_gen_xfer(struct spi_engine_program *p, bool dry, } static void spi_engine_gen_sleep(struct spi_engine_program *p, bool dry, - struct spi_engine *spi_engine, unsigned int clk_div, unsigned int delay) + struct spi_engine *spi_engine, unsigned int clk_div, + struct spi_transfer *xfer) { unsigned int spi_clk = clk_get_rate(spi_engine->ref_clk); unsigned int t; + int delay; + + if (xfer->delay_usecs) { + delay = xfer->delay_usecs; + } else { + delay = spi_delay_to_ns(&xfer->delay, xfer); + if (delay < 0) + return; + delay /= 1000; + } if (delay == 0) return; @@ -218,8 +229,7 @@ static int spi_engine_compile_message(struct spi_engine *spi_engine, spi_engine_gen_cs(p, dry, spi, true); spi_engine_gen_xfer(p, dry, xfer); - spi_engine_gen_sleep(p, dry, spi_engine, clk_div, - xfer->delay_usecs); + spi_engine_gen_sleep(p, dry, spi_engine, clk_div, xfer); cs_change = xfer->cs_change; if (list_is_last(&xfer->transfer_list, &msg->transfers)) -- 2.20.1
