Hi Kevin, On Thu, Sep 26, 2019 at 12:47 AM Kevin Hilman <khil...@baylibre.com> wrote: > > Martin Blumenstingl <martin.blumensti...@googlemail.com> writes: > > > Hi Jerome, > > > > On Mon, Sep 23, 2019 at 11:29 AM Jerome Brunet <jbru...@baylibre.com> wrote: > >> > >> On Sat 21 Sep 2019 at 17:12, Martin Blumenstingl > >> <martin.blumensti...@googlemail.com> wrote: > >> > >> > So far the HHI clock controller has been providing the XTAL clock on > >> > Amlogic Meson8/Meson8b/Meson8m2 SoCs. > >> > This is not correct because the XTAL is actually a crystal on the > >> > boards and the SoC has a dedicated input for it. > >> > > >> > This updates the dt-bindings of the HHI clock controller and defines > >> > a fixed-clock in meson.dtsi (along with switching everything over to > >> > use this clock). > >> > The clock driver needs three updates to use this: > >> > - patch #2 uses clk_hw_set_parent in the CPU clock notifier. This drops > >> > the explicit reference to CLKID_XTAL while at the same time making > >> > the code much easier (thanks to Neil for providing this new method > >> > as part of the G12A CPU clock bringup!) > >> > - patch #3 ensures that the clock driver doesn't rely on it's internal > >> > XTAL clock while not losing support for older .dtbs that don't have > >> > the XTAL clock input yet > >> > - with patch #4 the clock controller's own XTAL clock is not registered > >> > anymore when a clock input is provided via OF > >> > > >> > This series is a functional no-op. It's main goal is to better represent > >> > how the actual hardware looks like. > >> > >> I'm a bit unsure about this series. > >> > >> On one hand, I totally agree with you ... having the xtal in DT is the > >> right way to do it ... when done from the start > > yep > > > >> On the other hand, things have been this way for years, they are working > >> and going for xtal in DT does not solve any pending issue. Doing this > >> means adding complexity in the driver to support both methods. It is > >> also quite a significant change in DT :/ > > my two main motivations were: > > - keeping the 32-bit SoCs as similar as possible to the 64-bit ones in > > terms of "how are the [clock] drivers implemented" > > - with the DDR clock controller the .dts looked weird: &ddr_clkc took > > CLKID_XTAL from &clkc as input and &clkc took DDR_CLKID_DDR_PLL as > > input from &ddr_clkc > > > > RE complexity in the driver to support both: > > I still have a cleanup of the meson8b.c init code on my TODO-list > > because we're still supporting .dtbs without parent syscon > > my plan is to drop that code-path along with the newly added fallback > > for "skip CLKID_XTAL" (assuming this is accepted) together for v5.6 or > > v5.7 > > TBH, I'm big(ish) "functional no-op" changes like this are not things I > get super exicted about, especially for SoCs that have been working well > for awhile, and are do not have a large (upstream) userbase. > > OTOH, since Martin is doing most of the heavy lifting for keeping this > platform working upstream, I'm happy to take the changes, as long as > Martin is willing to deal with any fallout. I agree: it has to work and if it doesn't then I will have to fix it so it is so I will be taking care of any fallout
Martin