The Netronix board E60K02 can be found some several Ebook-Readers, at least the Kobo Clara HD and the Tolino Shine 3. The board is equipped with different SoCs.
For now the following peripherals are included: - LED - Power Key - Cover (gpio via hall sensor) - RC5T619 PMIC (the kernel misses support for rtc and charger subdevices). - Backlight via lm3630a - Wifi sdio chip detection (mmc-powerseq and stuff) It is based on vendor kernel but heavily reworked due to many changed bindings. Signed-off-by: Andreas Kemnade <andr...@kemnade.info> --- backligt dependencies: module autoloading: https://patchwork.kernel.org/patch/11139987/ enable-gpios property: https://patchwork.kernel.org/patch/11143795/ arch/arm/boot/dts/e60k02.dtsi | 339 ++++++++++++++++++++++++++++++++++ 1 file changed, 339 insertions(+) create mode 100644 arch/arm/boot/dts/e60k02.dtsi diff --git a/arch/arm/boot/dts/e60k02.dtsi b/arch/arm/boot/dts/e60k02.dtsi new file mode 100644 index 000000000000..c4fa8e314e2e --- /dev/null +++ b/arch/arm/boot/dts/e60k02.dtsi @@ -0,0 +1,339 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2019 Andreas Kemnade + * based on works + * Copyright 2016 Freescale Semiconductor, Inc. + * and + * Copyright (C) 2014 Ricoh Electronic Devices Co., Ltd + * + * Netronix E60K02 board common. + * This board is equipped with different SoCs and + * found in ebook-readers like the Kobo Clara HD (with i.MX6SLL) and + * the Tolino Shine 3 (with i.MX6SL) + */ + +/ { + + memory { + reg = <0x80000000 0x80000000>; + }; + + chosen { + stdout-path = &uart1; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + post-power-on-delay-ms = <20>; + reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_sd3_vmmc: wifi_regulator { + compatible = "regulator-fixed"; + regulator-name = "SD3_SPWR"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + + gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>; + enable-active-high; + + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led>; + + GLED { + gpios = <&gpio5 7 GPIO_ACTIVE_LOW>; + linux,default-trigger = "timer"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + power { + label = "Power"; + gpios = <&gpio5 8 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + gpio-key,wakeup; + }; + cover { + label = "Cover"; + gpios = <&gpio5 12 GPIO_ACTIVE_LOW>; + linux,code = <SW_LID>; + linux,input-type = <0x05>; /* EV_SW */ + gpio-key,wakeup; + }; + }; + +}; + + + +&audmux { + pinctrl-names = "default"; + status = "disabled"; +}; + +&snvs_rtc { + status = "disabled"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default","sleep"; + pinctrl-0 = <&pinctrl_i2c1 &pinctrl_lm3630a_bl_gpio>; + pinctrl-1 = <&pinctrl_i2c1_sleep>; + status = "okay"; + + lm3630a: lm3630a-i2c@36 { + reg = <0x36>; + status = "ok"; + + compatible = "ti,lm3630a"; + enable-gpios = <&gpio2 10 0>; + + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + led-sources = <0>; + label = "backlight_warm"; + default-brightness = <0>; + max-brightness = <255>; + }; + + led@1 { + reg = <1>; + led-sources = <1>; + label = "backlight_cold"; + default-brightness = <0>; + max-brightness = <255>; + }; + + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3 &pinctrl_ricoh_gpio>; + status = "okay"; + + ricoh619: ricoh619-i2c@32 { + compatible = "ricoh,rc5t619"; + reg = <0x32>; + + system-power-controller; + gpios = <&gpio5 11 GPIO_ACTIVE_LOW>; + gpio_chg = <&gpio5 15 GPIO_ACTIVE_LOW>; + gpio_bat_low = <&gpio3 28 GPIO_ACTIVE_LOW>; + }; + +}; + +&ricoh619 +{ + compatible = "ricoh,rc5t619"; + + regulators { + ricoh619_dcdc1_reg: DCDC1 { + regulator-name = "DCDC1"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + /* Core3_3V3 */ + ricoh619_dcdc2_reg: DCDC2 { + regulator-name = "DCDC2"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + ricoh619_dcdc3_reg: DCDC3 { + regulator-name = "DCDC3"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-always-on;// + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1140000>; + }; + }; + + /* Core4_1V2 */ + ricoh619_dcdc4_reg: DCDC4 { + regulator-name = "DCDC4"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1140000>; + }; + }; + + /* Core4_1V8 */ + ricoh619_dcdc5_reg: DCDC5 { + regulator-name = "DCDC5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1700000>; + }; + }; + + /* IR_3V3 */ + ricoh619_ldo1_reg: LDO1 { + regulator-name = "LDO1"; + //regulator-always-on; + regulator-boot-on; + }; + + /* Core1_3V3 */ + ricoh619_ldo2_reg: LDO2 { + regulator-name = "LDO2"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + /* Core5_1V2 */ + ricoh619_ldo3_reg: LDO3 { + regulator-name = "LDO3"; + regulator-always-on; + regulator-boot-on; + }; + + ricoh619_ldo4_reg: LDO4 { + regulator-name = "LDO4"; + regulator-boot-on; + }; + + /* SPD_3V3 */ + ricoh619_ldo5_reg: LDO5 { + regulator-name = "LDO5"; + regulator-always-on; + regulator-boot-on; + }; + + /* DDR_0V6 */ + ricoh619_ldo6_reg: LDO6 { + regulator-name = "LDO6"; + regulator-always-on; + regulator-boot-on; + }; + + /* VDD_PWM */ + ricoh619_ldo7_reg: LDO7 { + regulator-name = "LDO7"; + regulator-always-on; + regulator-boot-on; + }; + + /* ldo_1v8 */ + ricoh619_ldo8_reg: LDO8 { + regulator-name = "LDO8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ricoh619_ldo9_reg: LDO9 { + regulator-name = "LDO9"; + regulator-boot-on; + }; + + ricoh619_ldo10_reg: LDO10 { + regulator-name = "LDO10"; + regulator-boot-on; + }; + + ricoh619_ldortc1_reg: LDORTC1 { + regulator-name = "LDORTC1"; + regulator-boot-on; + }; + + ricoh619_ldortc2_reg: LDORTC2 { + regulator-name = "LDORTC2"; + regulator-boot-on; + }; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&usdhc1 { + status = "disabled"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + pinctrl-3 = <&pinctrl_usdhc2_sleep>; + non-removable; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep"; + pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_usdhc3_pwr>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + pinctrl-3 = <&pinctrl_usdhc3_sleep>, <&pinctrl_usdhc3_pwr>; + vmmc-supply = <®_sd3_vmmc>; + mmc-pwrseq = <&wifi_pwrseq>; + cap-power-off-card; + non-removable; + status = "okay"; +}; + +&usbotg1 { + pinctrl-names = "default"; + disable-over-current; + srp-disable; + hnp-disable; + adp-disable; + status = "okay"; +}; + + +&ssi2 { + status = "disabled"; +}; + -- 2.20.1
