[PATCH v6 5/7] arm64: dts: amlogic: g12a: add cooling properties

[Guillaume La Roque]

Add missing #colling-cells field for G12A SoC
Add cooling-map for passive and hot trip point

Tested-by: Christian Hewitt <christianshew...@gmail.com>
Tested-by: Kevin Hilman <khil...@baylibre.com>
Signed-off-by: Guillaume La Roque <glaro...@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 24 +++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi 
b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
index 733a9d46fc4b..3ab6497548ca 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
@@ -18,6 +18,7 @@
                        reg = <0x0 0x0>;
                        enable-method = "psci";
                        next-level-cache = <&l2>;
+                       #cooling-cells = <2>;
                };
 
                cpu1: cpu@1 {
@@ -26,6 +27,7 @@
                        reg = <0x0 0x1>;
                        enable-method = "psci";
                        next-level-cache = <&l2>;
+                       #cooling-cells = <2>;
                };
 
                cpu2: cpu@2 {
@@ -34,6 +36,7 @@
                        reg = <0x0 0x2>;
                        enable-method = "psci";
                        next-level-cache = <&l2>;
+                       #cooling-cells = <2>;
                };
 
                cpu3: cpu@3 {
@@ -42,6 +45,7 @@
                        reg = <0x0 0x3>;
                        enable-method = "psci";
                        next-level-cache = <&l2>;
+                       #cooling-cells = <2>;
                };
 
                l2: l2-cache0 {
@@ -113,3 +117,23 @@
 &sd_emmc_a {
        amlogic,dram-access-quirk;
 };
+
+&cpu_thermal {
+       cooling-maps {
+               map0 {
+                       trip = <&cpu_passive>;
+                       cooling-device = <&cpu0 THERMAL_NO_LIMIT 
THERMAL_NO_LIMIT>,
+                                       <&cpu1 THERMAL_NO_LIMIT 
THERMAL_NO_LIMIT>,
+                                       <&cpu2 THERMAL_NO_LIMIT 
THERMAL_NO_LIMIT>,
+                                       <&cpu3 THERMAL_NO_LIMIT 
THERMAL_NO_LIMIT>;
+               };
+
+               map1 {
+                       trip = <&cpu_hot>;
+                       cooling-device = <&cpu0 THERMAL_NO_LIMIT 
THERMAL_NO_LIMIT>,
+                                       <&cpu1 THERMAL_NO_LIMIT 
THERMAL_NO_LIMIT>,
+                                       <&cpu2 THERMAL_NO_LIMIT 
THERMAL_NO_LIMIT>,
+                                       <&cpu3 THERMAL_NO_LIMIT 
THERMAL_NO_LIMIT>;
+               };
+       };
+};
-- 
2.17.1