On 9/27/19 8:36 PM, Benoit Parrot wrote:
> v4l2-compliance fails with this message:
>
> warn: v4l2-test-formats.cpp(717): \
> TRY_FMT cannot handle an invalid pixelformat.
> test VIDIOC_TRY_FMT: FAIL
>
> This causes the following kernel panic:
>
> Unable to handle kernel paging request at virtual address 56595561
> pgd = ecd80e00
> *pgd=00000000
> Internal error: Oops: 205 [#1] PREEMPT SMP ARM
> ...
> CPU: 0 PID: 930 Comm: v4l2-compliance Not tainted \
> 4.14.62-01715-gc8cd67f49a19 #1
> Hardware name: Generic DRA72X (Flattened Device Tree)
> task: ece44d80 task.stack: ecc6e000
> PC is at __vpe_try_fmt+0x18c/0x2a8 [ti_vpe]
> LR is at 0x8
>
> Because the driver fails to properly check the 'num_planes' values for
> proper ranges it ends up accessing out of bound data causing the kernel
> panic.
>
> Since this driver only handle single or dual plane pixel format, make
> sure the provided value does not exceed 2 planes.
>
> Signed-off-by: Benoit Parrot <[email protected]>
> Reviewed-by: Tomi Valkeinen <[email protected]>
> ---
> drivers/media/platform/ti-vpe/vpe.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/media/platform/ti-vpe/vpe.c
> b/drivers/media/platform/ti-vpe/vpe.c
> index bbbf11174e16..1278d457f753 100644
> --- a/drivers/media/platform/ti-vpe/vpe.c
> +++ b/drivers/media/platform/ti-vpe/vpe.c
> @@ -1650,7 +1650,7 @@ static int __vpe_try_fmt(struct vpe_ctx *ctx, struct
> v4l2_format *f,
> &pix->height, MIN_H, MAX_H, H_ALIGN,
> S_ALIGN);
>
> - if (!pix->num_planes)
> + if (!pix->num_planes || pix->num_planes > 2)
> pix->num_planes = fmt->coplanar ? 2 : 1;
> else if (pix->num_planes > 1 && !fmt->coplanar)
> pix->num_planes = 1;
>
This looks weird.
Why not just unconditionally do:
pix->num_planes = fmt->coplanar ? 2 : 1;
Regards,
Hans
