On Mon, Sep 30, 2019 at 03:34:31PM +0200, Michal Vokáč wrote:
> On 26. 09. 19 10:59, Michal Vokáč wrote:
> > The QCA8K family supports up to 7 ports. So use the existing
> > QCA8K_NUM_PORTS define to allocate the switch structure and limit all
> > operations with the switch ports.
> >
> > This was not an issue until commit 0394a63acfe2 ("net: dsa: enable and
> > disable all ports") disabled all unused ports. Since the unused ports 7-11
> > are outside of the correct register range on this switch some registers
> > were rewritten with invalid content.
> >
> > Fixes: 6b93fb46480a ("net-next: dsa: add new driver for qca8xxx family")
> > Fixes: a0c02161ecfc ("net: dsa: variable number of ports")
> > Fixes: 0394a63acfe2 ("net: dsa: enable and disable all ports")
> > Signed-off-by: Michal Vokáč <michal.vo...@ysoft.com>
>
> More recent patches on the list are getting attention.
> Is this one falling through the cracks?
Probably not, it is missing a review-by, from somebody David trusts.
Reviewed-by: Andrew Lunn <and...@lunn.ch>
Andrew
