Hi Krzysztof,
On 10/2/19 7:44 PM, Krzysztof Kozlowski wrote:
> After adding the interrupt properties to Exynos5422 DMC bindings
> example, the mapped memory region must be big enough to access
> performance counters registers.
>
> Fix also syntax errors (semicolons) and adjust indentation.
>
> Signed-off-by: Krzysztof Kozlowski <k...@kernel.org>
>
> ---
>
> Rebased on top of my for-next branch as exynos5422-dmc.txt bindings were
> applied by me.
> ---
> .../bindings/memory-controllers/exynos5422-dmc.txt | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git
> a/Documentation/devicetree/bindings/memory-controllers/exynos5422-dmc.txt
> b/Documentation/devicetree/bindings/memory-controllers/exynos5422-dmc.txt
> index e2434cac4858..02e4a1f862f1 100644
> --- a/Documentation/devicetree/bindings/memory-controllers/exynos5422-dmc.txt
> +++ b/Documentation/devicetree/bindings/memory-controllers/exynos5422-dmc.txt
> @@ -55,7 +55,7 @@ Example:
>
> dmc: memory-controller@10c20000 {
> compatible = "samsung,exynos5422-dmc";
> - reg = <0x10c20000 0x100>, <0x10c30000 0x100>,
> + reg = <0x10c20000 0x10000>, <0x10c30000 0x10000>;
> clocks = <&clock CLK_FOUT_SPLL>,
> <&clock CLK_MOUT_SCLK_SPLL>,
> <&clock CLK_FF_DOUT_SPLL2>,
> @@ -63,7 +63,7 @@ Example:
> <&clock CLK_MOUT_BPLL>,
> <&clock CLK_SCLK_BPLL>,
> <&clock CLK_MOUT_MX_MSPLL_CCORE>,
> - <&clock CLK_MOUT_MCLK_CDREX>,
> + <&clock CLK_MOUT_MCLK_CDREX>;
> clock-names = "fout_spll",
> "mout_sclk_spll",
> "ff_dout_spll2",
> @@ -71,10 +71,10 @@ Example:
> "mout_bpll",
> "sclk_bpll",
> "mout_mx_mspll_ccore",
> - "mout_mclk_cdrex",
> + "mout_mclk_cdrex";
> operating-points-v2 = <&dmc_opp_table>;
> devfreq-events = <&ppmu_event3_dmc0_0>, <&ppmu_event3_dmc0_1>,
> - <&ppmu_event3_dmc1_0>, <&ppmu_event3_dmc1_1>;
> + <&ppmu_event3_dmc1_0>, <&ppmu_event3_dmc1_1>;
> device-handle = <&samsung_K3QF2F20DB>;
> vdd-supply = <&buck1_reg>;
> samsung,syscon-clk = <&clock>;
>
Thank you for the patch. Indeed it must also be updated.
Reviewed-by: Lukasz Luba <l.l...@partner.samsung.com>
Regards,
Lukasz
