On Thu, Oct 03, 2019 at 04:13:07PM +1000, Alexey Kardashevskiy wrote: > On 13/08/2019 02:06, Catalin Marinas wrote: > > Object scan areas are an optimisation aimed to decrease the false > > positives and slightly improve the scanning time of large objects known > > to only have a few specific pointers. If a struct scan_area fails to > > allocate, kmemleak can still function normally by scanning the full > > object. > > > > Introduce an OBJECT_FULL_SCAN flag and mark objects as such when > > scan_area allocation fails. > > I came across this one while bisecting sudden drop in throughput of a > 100Gbit Mellanox CX4 ethernet card in a PPC POWER9 system, the speed > dropped from 100Gbit to about 40Gbit. Bisect pointed at dba82d943177, > this are the relevant config options: > > [fstn1-p1 kernel]$ grep KMEMLEAK ~/pbuild/kernel-le-4g/.config > CONFIG_HAVE_DEBUG_KMEMLEAK=y > CONFIG_DEBUG_KMEMLEAK=y > CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE=16000 > # CONFIG_DEBUG_KMEMLEAK_TEST is not set > # CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF is not set > CONFIG_DEBUG_KMEMLEAK_AUTO_SCAN=y
The throughput drop is probably caused caused by kmemleak slowing down all memory allocations (including skb). So that's expected. You may get similar drop with other debug options like lock proving, kasan. > Setting CONFIG_DEBUG_KMEMLEAK_MEM_POOL_SIZE=400 or even 4000 (this is > what KMEMLEAK_EARLY_LOG_SIZE is now in the master) produces soft > lockups on the recent upstream (sha1 a3c0e7b1fe1f): > > [c000001fde64fb60] [c000000000c24ed4] _raw_write_unlock_irqrestore+0x54/0x70 > [c000001fde64fb90] [c0000000004117e4] find_and_remove_object+0xa4/0xd0 > [c000001fde64fbe0] [c000000000411c74] delete_object_full+0x24/0x50 > [c000001fde64fc00] [c000000000411d28] __kmemleak_do_cleanup+0x88/0xd0 > [c000001fde64fc40] [c00000000012a1a4] process_one_work+0x374/0x6a0 > [c000001fde64fd20] [c00000000012a548] worker_thread+0x78/0x5a0 > [c000001fde64fdb0] [c000000000135508] kthread+0x198/0x1a0 > [c000001fde64fe20] [c00000000000b980] ret_from_kernel_thread+0x5c/0x7c That's the kmemleak disabling path. I don't have the full log but I suspect by setting a small pool size, kmemleak failed to allocate memory and went into disabling itself. The clean-up above tries to remove the allocated metadata. It seems that it takes significant time on your platform. Not sure how to avoid the soft lock-up but I wouldn't bother too much about it, it's only triggered by a previous error condition disabling kmemleak. > KMEMLEAK_EARLY_LOG_SIZE=8000 works but slow. > > Interestingly KMEMLEAK_EARLY_LOG_SIZE=400 on dba82d943177 still worked > and I saw my 100Gbit. Disabling KMEMLEAK also fixes the speed > (apparently). A small memory pool for kmemleak just disables it shortly after boot, so it's no longer in the way and you get your throughput back. > Is that something expected? Thanks, Yes for the throughput. Not sure about the soft lock-up. Do you have the full log around the lock-up? -- Catalin