On Wed, 4 Sep 2019 at 18:46, Raul E Rangel <rran...@chromium.org> wrote: > > In sdhci_do_reset we call the reset callback which is typically > sdhci_reset. sdhci_reset can wait for up to 100ms waiting for the > controller to reset. If SDHCI_RESET_ALL was passed as the flag, the > controller will clear the IRQ mask. If during that 100ms the card is > removed there is no notification to the MMC system that the card was > removed. So from the drivers point of view the card is always present. > > By making sdhci_reinit compare the present state it can schedule a > rescan if the card was removed while a reset was in progress. > > Signed-off-by: Raul E Rangel <rran...@chromium.org>
Applied for next, thanks! Kind regards Uffe > --- > Sorry this took me so long to send out. I tested out the patch set on > 5.3-rc5 with multiple devices. > > This patch was proposed here by Adrian: > https://patchwork.kernel.org/patch/10925469/#22691177 > > drivers/mmc/host/sdhci.c | 11 +++++++++++ > 1 file changed, 11 insertions(+) > > diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c > index a5dc5aae973e..b0045880ee3d 100644 > --- a/drivers/mmc/host/sdhci.c > +++ b/drivers/mmc/host/sdhci.c > @@ -337,8 +337,19 @@ static void sdhci_init(struct sdhci_host *host, int soft) > > static void sdhci_reinit(struct sdhci_host *host) > { > + u32 cd = host->ier & (SDHCI_INT_CARD_REMOVE | SDHCI_INT_CARD_INSERT); > + > sdhci_init(host, 0); > sdhci_enable_card_detection(host); > + > + /* > + * A change to the card detect bits indicates a change in present > state, > + * refer sdhci_set_card_detection(). A card detect interrupt might > have > + * been missed while the host controller was being reset, so trigger a > + * rescan to check. > + */ > + if (cd != (host->ier & (SDHCI_INT_CARD_REMOVE | > SDHCI_INT_CARD_INSERT))) > + mmc_detect_change(host->mmc, msecs_to_jiffies(200)); > } > > static void __sdhci_led_activate(struct sdhci_host *host) > -- > 2.23.0.187.g17f5b7556c-goog >
