From: Sebastian Reichel <[email protected]> Add a node for the UART part of WiLink chip.
Tested-by: Enric Balletbo i Serra <[email protected]> Signed-off-by: Sebastian Reichel <[email protected]> --- arch/arm/boot/dts/omap3-igep0020-rev-f.dts | 8 ++++++++ arch/arm/boot/dts/omap3-igep0030-rev-g.dts | 8 ++++++++ 2 files changed, 16 insertions(+) diff --git a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts index 03dcd05fb8a0..001decc20b3d 100644 --- a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts +++ b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts @@ -49,3 +49,11 @@ interrupts = <17 IRQ_TYPE_EDGE_RISING>; /* gpio 177 */ }; }; + +&uart2 { + bluetooth { + compatible = "ti,wl1835-st"; + enable-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; /* gpio 137 */ + max-speed = <300000>; + }; +}; diff --git a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts index 060acd1e803a..9a8975799e16 100644 --- a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts +++ b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts @@ -71,3 +71,11 @@ interrupts = <8 IRQ_TYPE_EDGE_RISING>; /* gpio 136 */ }; }; + +&uart2 { + bluetooth { + compatible = "ti,wl1835-st"; + enable-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; /* gpio 137 */ + max-speed = <300000>; + }; +}; -- 2.23.0
