Add minimal thermal zone for two temperature sensor One is located close to the DDR and the other one is located close to the PLLs (between the CPU and GPU)
Acked-by: Martin Blumenstingl <[email protected]> Reviewed-by: Neil Armstrong <[email protected]> Tested-by: Christian Hewitt <[email protected]> Tested-by: Kevin Hilman <[email protected]> Signed-off-by: Guillaume La Roque <[email protected]> --- .../boot/dts/amlogic/meson-g12-common.dtsi | 57 +++++++++++++++++++ 1 file changed, 57 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi index 0660d9ef6a86..a98c16e163c2 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi @@ -12,6 +12,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h> #include <dt-bindings/reset/amlogic,meson-g12a-reset.h> +#include <dt-bindings/thermal/thermal.h> / { interrupt-parent = <&gic>; @@ -94,6 +95,61 @@ #size-cells = <2>; ranges; + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay = <1000>; + polling-delay-passive = <100>; + thermal-sensors = <&cpu_temp>; + + trips { + cpu_passive: cpu-passive { + temperature = <85000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + + cpu_hot: cpu-hot { + temperature = <95000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "hot"; + }; + + cpu_critical: cpu-critical { + temperature = <110000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "critical"; + }; + }; + }; + + ddr_thermal: ddr-thermal { + polling-delay = <1000>; + polling-delay-passive = <100>; + thermal-sensors = <&ddr_temp>; + + trips { + ddr_passive: ddr-passive { + temperature = <85000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + + ddr_critical: ddr-critical { + temperature = <110000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "critical"; + }; + }; + + cooling-maps { + map { + trip = <&ddr_passive>; + cooling-device = <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + ethmac: ethernet@ff3f0000 { compatible = "amlogic,meson-axg-dwmac", "snps,dwmac-3.70a", @@ -2412,6 +2468,7 @@ assigned-clock-rates = <0>, /* Do Nothing */ <800000000>, <0>; /* Do Nothing */ + #cooling-cells = <2>; }; }; -- 2.17.1
