On Wed, 2 Oct 2019 10:57:59 +0200
Bartosz Golaszewski <b...@bgdev.pl> wrote:
> From: Bartosz Golaszewski <bgolaszew...@baylibre.com>
>
> We can drop some duplicate code if we use devm_action for disabling
> regulators and pm. This allows us to completely remove all remove()
> callbacks from both i2c and spi code.
>
> Signed-off-by: Bartosz Golaszewski <bgolaszew...@baylibre.com>
Ah. I should read all the patches but that would be far too much like hard
work. Roll this one and patch 2 together and we should have satisfied the
issues I had with that.
Thanks,
Jonathan
> ---
> drivers/iio/pressure/bmp280-core.c | 61 +++++++++++++++---------------
> drivers/iio/pressure/bmp280-i2c.c | 6 ---
> drivers/iio/pressure/bmp280-spi.c | 6 ---
> drivers/iio/pressure/bmp280.h | 1 -
> 4 files changed, 30 insertions(+), 44 deletions(-)
>
> diff --git a/drivers/iio/pressure/bmp280-core.c
> b/drivers/iio/pressure/bmp280-core.c
> index fdbd3bc27921..79254dd26dfd 100644
> --- a/drivers/iio/pressure/bmp280-core.c
> +++ b/drivers/iio/pressure/bmp280-core.c
> @@ -984,6 +984,22 @@ static int bmp085_fetch_eoc_irq(struct device *dev,
> return 0;
> }
>
> +static void bmp280_pm_disable(void *data)
> +{
> + struct device *dev = data;
> +
> + pm_runtime_get_sync(dev);
> + pm_runtime_put_noidle(dev);
> + pm_runtime_disable(dev);
> +}
> +
> +static void bmp280_regulators_disable(void *data)
> +{
> + struct regulator_bulk_data *supplies = data;
> +
> + regulator_bulk_disable(BMP280_NUM_SUPPLIES, supplies);
> +}
> +
> int bmp280_common_probe(struct device *dev,
> struct regmap *regmap,
> unsigned int chip,
> @@ -1055,6 +1071,11 @@ int bmp280_common_probe(struct device *dev,
> return ret;
> }
>
> + ret = devm_add_action_or_reset(dev, bmp280_regulators_disable,
> + data->supplies);
> + if (ret)
> + return ret;
> +
> /* Wait to make sure we started up properly */
> usleep_range(data->start_up_time, data->start_up_time + 100);
>
> @@ -1069,17 +1090,16 @@ int bmp280_common_probe(struct device *dev,
> data->regmap = regmap;
> ret = regmap_read(regmap, BMP280_REG_ID, &chip_id);
> if (ret < 0)
> - goto out_disable_regulators;
> + return ret;
> if (chip_id != chip) {
> dev_err(dev, "bad chip id: expected %x got %x\n",
> chip, chip_id);
> - ret = -EINVAL;
> - goto out_disable_regulators;
> + return -EINVAL;
> }
>
> ret = data->chip_info->chip_config(data);
> if (ret < 0)
> - goto out_disable_regulators;
> + return ret;
>
> dev_set_drvdata(dev, indio_dev);
>
> @@ -1093,14 +1113,14 @@ int bmp280_common_probe(struct device *dev,
> if (ret < 0) {
> dev_err(data->dev,
> "failed to read calibration coefficients\n");
> - goto out_disable_regulators;
> + return ret;
> }
> } else if (chip_id == BMP280_CHIP_ID || chip_id == BME280_CHIP_ID) {
> ret = bmp280_read_calib(data, &data->calib.bmp280, chip_id);
> if (ret < 0) {
> dev_err(data->dev,
> "failed to read calibration coefficients\n");
> - goto out_disable_regulators;
> + return ret;
> }
> }
>
> @@ -1112,7 +1132,7 @@ int bmp280_common_probe(struct device *dev,
> if (irq > 0 || (chip_id == BMP180_CHIP_ID)) {
> ret = bmp085_fetch_eoc_irq(dev, name, irq, data);
> if (ret)
> - goto out_disable_regulators;
> + return ret;
> }
>
> /* Enable runtime PM */
> @@ -1127,35 +1147,14 @@ int bmp280_common_probe(struct device *dev,
> pm_runtime_use_autosuspend(dev);
> pm_runtime_put(dev);
>
> - ret = devm_iio_device_register(dev, indio_dev);
> + ret = devm_add_action_or_reset(dev, bmp280_pm_disable, dev);
> if (ret)
> - goto out_runtime_pm_disable;
> -
> - return 0;
> + return ret;
>
> -out_runtime_pm_disable:
> - pm_runtime_get_sync(data->dev);
> - pm_runtime_put_noidle(data->dev);
> - pm_runtime_disable(data->dev);
> -out_disable_regulators:
> - regulator_bulk_disable(BMP280_NUM_SUPPLIES, data->supplies);
> - return ret;
> + return devm_iio_device_register(dev, indio_dev);
> }
> EXPORT_SYMBOL(bmp280_common_probe);
>
> -int bmp280_common_remove(struct device *dev)
> -{
> - struct iio_dev *indio_dev = dev_get_drvdata(dev);
> - struct bmp280_data *data = iio_priv(indio_dev);
> -
> - pm_runtime_get_sync(data->dev);
> - pm_runtime_put_noidle(data->dev);
> - pm_runtime_disable(data->dev);
> - regulator_bulk_disable(BMP280_NUM_SUPPLIES, data->supplies);
> - return 0;
> -}
> -EXPORT_SYMBOL(bmp280_common_remove);
> -
> #ifdef CONFIG_PM
> static int bmp280_runtime_suspend(struct device *dev)
> {
> diff --git a/drivers/iio/pressure/bmp280-i2c.c
> b/drivers/iio/pressure/bmp280-i2c.c
> index acd9a3784fb4..3109c8e2cc11 100644
> --- a/drivers/iio/pressure/bmp280-i2c.c
> +++ b/drivers/iio/pressure/bmp280-i2c.c
> @@ -38,11 +38,6 @@ static int bmp280_i2c_probe(struct i2c_client *client,
> client->irq);
> }
>
> -static int bmp280_i2c_remove(struct i2c_client *client)
> -{
> - return bmp280_common_remove(&client->dev);
> -}
> -
> static const struct acpi_device_id bmp280_acpi_i2c_match[] = {
> {"BMP0280", BMP280_CHIP_ID },
> {"BMP0180", BMP180_CHIP_ID },
> @@ -82,7 +77,6 @@ static struct i2c_driver bmp280_i2c_driver = {
> .pm = &bmp280_dev_pm_ops,
> },
> .probe = bmp280_i2c_probe,
> - .remove = bmp280_i2c_remove,
> .id_table = bmp280_i2c_id,
> };
> module_i2c_driver(bmp280_i2c_driver);
> diff --git a/drivers/iio/pressure/bmp280-spi.c
> b/drivers/iio/pressure/bmp280-spi.c
> index 9d57b7a3b134..625b86878ad8 100644
> --- a/drivers/iio/pressure/bmp280-spi.c
> +++ b/drivers/iio/pressure/bmp280-spi.c
> @@ -86,11 +86,6 @@ static int bmp280_spi_probe(struct spi_device *spi)
> spi->irq);
> }
>
> -static int bmp280_spi_remove(struct spi_device *spi)
> -{
> - return bmp280_common_remove(&spi->dev);
> -}
> -
> static const struct of_device_id bmp280_of_spi_match[] = {
> { .compatible = "bosch,bmp085", },
> { .compatible = "bosch,bmp180", },
> @@ -118,7 +113,6 @@ static struct spi_driver bmp280_spi_driver = {
> },
> .id_table = bmp280_spi_id,
> .probe = bmp280_spi_probe,
> - .remove = bmp280_spi_remove,
> };
> module_spi_driver(bmp280_spi_driver);
>
> diff --git a/drivers/iio/pressure/bmp280.h b/drivers/iio/pressure/bmp280.h
> index eda50ef65706..57ba0e85db91 100644
> --- a/drivers/iio/pressure/bmp280.h
> +++ b/drivers/iio/pressure/bmp280.h
> @@ -112,7 +112,6 @@ int bmp280_common_probe(struct device *dev,
> unsigned int chip,
> const char *name,
> int irq);
> -int bmp280_common_remove(struct device *dev);
>
> /* PM ops */
> extern const struct dev_pm_ops bmp280_dev_pm_ops;
