Hi, Shawn
> On Thu, Sep 19, 2019 at 05:46:47PM +0800, Anson Huang wrote:
> > Enable i2c3 for i.MX8MM EVK board.
> >
> > Signed-off-by: Anson Huang <anson.hu...@nxp.com>
> > ---
> > arch/arm64/boot/dts/freescale/imx8mm-evk.dts | 14 ++++++++++++++
> > 1 file changed, 14 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
> > b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
> > index f7a15f3..7758c1c 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
> > +++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
> > @@ -306,6 +306,13 @@
> > };
> > };
> >
> > +&i2c3 {
> > + clock-frequency = <400000>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_i2c3>;
> > + status = "okay";
> > +};
> > +
> > &iomuxc {
>
> The iomuxc node is being put at end of file because of its huge pinctrl data.
> I2C devices should be placed in alphabetical sort though. Can you please
> have a patch moving i2c1 and i2c2 to correct place first, and then add i2c3?
Done in V2.
Thanks,
Anson
