Hi Anand, On Wed, Oct 9, 2019 at 10:49 AM Anand Moon <linux.am...@gmail.com> wrote: [...] > > can you please share a boot log with the command line parameter > > "initcall_debug" [0]? > > from Documentation/admin-guide/kernel-parameters.txt: > > initcall_debug [KNL] Trace initcalls as they are executed. Useful > > for working out where the kernel is dying during > > startup. > > > > Well I have tied to add this command *initcall_debug* to kernel command > prompt. > Here is the console log, but I did not see any init kernel timer logs I don't remember from the top of my head if any additional Kconfig setting is needed
> Kernel command line: console=ttyAML0,115200n8 > root=PARTUUID=45d7d61e-01 rw rootwait > earlyprintk=serial,ttyAML0,115200 initcall_debug printk.time=y > > [0] https://pastebin.com/eBgJrSKe > > > you can also try the command line parameter "clk_ignore_unused" (it's > > just a gut feeling: maybe a "critical" clock is being disabled because > > it's not wired up correctly). > > > > It look like some clk issue after I added the *clk_ignore_unused* to > kernel command line > it booted further to login prompt and cpufreq DVFS seem to be loaded. > So I could conclude this is clk issue.below is the boot log interesting - as Jerome suggested: the next step is to find out which clock is causing problems last time I checked there was no debug print in the code which disables unused clocks so I had to add that myself > Kernel command line: console=ttyAML0,115200n8 > root=PARTUUID=45d7d61e-01 rw rootwait > earlyprintk=serial,ttyAML0,115200 initcall_debug printk.time=y > clk_ignore_unused > > [1] https://pastebin.com/Nsk0wZQJ > > > back when I was working out the CPU clock tree for the 32-bit SoCs I > > had a bad parent clock in one of the muxes which resulted in sporadic > > lockups if CPU DVFS was enabled. > > you can try to disable CPU DVFS by dropping the OPP table and it's > > references from the .dtsi > > > > Yep yesterday my focus was to disable PWM feature and get boot up-to > login prompt > But not I have to look into clk feature. > > *Many thanks for your valuable inputs, I learned a lot of things.* you're welcome :-) Martin
