Add interconnect nodes that's needed to support bus scaling.
Signed-off-by: Brian Masney <masn...@onstation.org>
---
arch/arm/boot/dts/qcom-msm8974.dtsi | 60 +++++++++++++++++++++++++++++
1 file changed, 60 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi
b/arch/arm/boot/dts/qcom-msm8974.dtsi
index bdbde5125a56..ed98d14a88b1 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -1,6 +1,7 @@
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
+#include <dt-bindings/interconnect/qcom,msm8974.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-msm8974.h>
#include <dt-bindings/clock/qcom,mmcc-msm8974.h>
@@ -1106,6 +1107,60 @@
};
};
+ bimc: interconnect@fc380000 {
+ reg = <0xfc380000 0x6a000>;
+ compatible = "qcom,msm8974-bimc";
+ #interconnect-cells = <1>;
+ clock-names = "bus", "bus_a";
+ clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
+ <&rpmcc RPM_SMD_BIMC_A_CLK>;
+ };
+
+ cnoc: interconnect@fc480000 {
+ reg = <0xfc480000 0x4000>;
+ compatible = "qcom,msm8974-cnoc";
+ #interconnect-cells = <1>;
+ clock-names = "bus", "bus_a";
+ clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
+ <&rpmcc RPM_SMD_CNOC_A_CLK>;
+ };
+
+ mmssnoc: interconnect@fc478000 {
+ reg = <0xfc478000 0x4000>;
+ compatible = "qcom,msm8974-mmssnoc";
+ #interconnect-cells = <1>;
+ clock-names = "bus", "bus_a";
+ clocks = <&mmcc MMSS_S0_AXI_CLK>,
+ <&mmcc MMSS_S0_AXI_CLK>;
+ };
+
+ ocmemnoc: interconnect@fc470000 {
+ reg = <0xfc470000 0x4000>;
+ compatible = "qcom,msm8974-ocmemnoc";
+ #interconnect-cells = <1>;
+ clock-names = "bus", "bus_a";
+ clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
+ <&rpmcc RPM_SMD_OCMEMGX_A_CLK>;
+ };
+
+ pnoc: interconnect@fc468000 {
+ reg = <0xfc468000 0x4000>;
+ compatible = "qcom,msm8974-pnoc";
+ #interconnect-cells = <1>;
+ clock-names = "bus", "bus_a";
+ clocks = <&rpmcc RPM_SMD_PNOC_CLK>,
+ <&rpmcc RPM_SMD_PNOC_A_CLK>;
+ };
+
+ snoc: interconnect@fc460000 {
+ reg = <0xfc460000 0x4000>;
+ compatible = "qcom,msm8974-snoc";
+ #interconnect-cells = <1>;
+ clock-names = "bus", "bus_a";
+ clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
+ <&rpmcc RPM_SMD_SNOC_A_CLK>;
+ };
+
mdss: mdss@fd900000 {
status = "disabled";
@@ -1152,6 +1207,11 @@
"core",
"vsync";
+ interconnects = <&mmssnoc MNOC_MAS_GRAPHICS_3D
&bimc BIMC_SLV_EBI_CH0>,
+ <&ocmemnoc OCMEM_VNOC_MAS_GFX3D
&ocmemnoc OCMEM_SLV_OCMEM>;
+ interconnect-names = "mdp0-mem",
+ "mdp1-mem";
+
ports {
#address-cells = <1>;
#size-cells = <0>;
--
2.21.0
