On Fri, Sep 06, 2019 at 09:28:13AM +0530, Abhishek Shah wrote:
> Invalidate PAXB inbound/outbound address mapping each time before
> programming it. This is helpful for the cases where we need to
> reprogram inbound/outbound address mapping without resetting PAXB.
> kexec kernel is one such example.

This looks like a hack, explain to us please what it actually solves and
why a full reset is not necessary.

> Signed-off-by: Abhishek Shah <abhishek.s...@broadcom.com>
> Reviewed-by: Ray Jui <ray....@broadcom.com>
> Reviewed-by: Vikram Mysore Prakash <vikram.prak...@broadcom.com>

Patches are reviewed on public mailing lists, remove tags given
on internal reviews - they are not relevant.

> ---
>  drivers/pci/controller/pcie-iproc.c | 28 ++++++++++++++++++++++++++++
>  1 file changed, 28 insertions(+)
> 
> diff --git a/drivers/pci/controller/pcie-iproc.c 
> b/drivers/pci/controller/pcie-iproc.c
> index e3ca46497470..99a9521ba7ab 100644
> --- a/drivers/pci/controller/pcie-iproc.c
> +++ b/drivers/pci/controller/pcie-iproc.c
> @@ -1245,6 +1245,32 @@ static int iproc_pcie_map_dma_ranges(struct iproc_pcie 
> *pcie)
>       return ret;
>  }
>  
> +static void iproc_pcie_invalidate_mapping(struct iproc_pcie *pcie)
> +{
> +     struct iproc_pcie_ib *ib = &pcie->ib;
> +     struct iproc_pcie_ob *ob = &pcie->ob;
> +     int idx;
> +
> +     if (pcie->ep_is_internal)

What's this check for and why leaving mappings in place is safe for
this category of IPs ?

> +             return;
> +
> +     if (pcie->need_ob_cfg) {
> +             /* iterate through all OARR mapping regions */
> +             for (idx = ob->nr_windows - 1; idx >= 0; idx--) {
> +                     iproc_pcie_write_reg(pcie,
> +                                          MAP_REG(IPROC_PCIE_OARR0, idx), 0);
> +             }
> +     }
> +
> +     if (pcie->need_ib_cfg) {
> +             /* iterate through all IARR mapping regions */
> +             for (idx = 0; idx < ib->nr_regions; idx++) {
> +                     iproc_pcie_write_reg(pcie,
> +                                          MAP_REG(IPROC_PCIE_IARR0, idx), 0);
> +             }
> +     }
> +}
> +
>  static int iproce_pcie_get_msi(struct iproc_pcie *pcie,
>                              struct device_node *msi_node,
>                              u64 *msi_addr)
> @@ -1517,6 +1543,8 @@ int iproc_pcie_setup(struct iproc_pcie *pcie, struct 
> list_head *res)
>       iproc_pcie_perst_ctrl(pcie, true);
>       iproc_pcie_perst_ctrl(pcie, false);
>  
> +     iproc_pcie_invalidate_mapping(pcie);

It makes more sense to call this in the .shutdown() method if I
understand what it does.

Lorenzo

>       if (pcie->need_ob_cfg) {
>               ret = iproc_pcie_map_ranges(pcie, res);
>               if (ret) {
> -- 
> 2.17.1
> 

Reply via email to