On 10/15/19 12:35 PM, Stefan Wahren wrote:
> Hi Florian,
>
> Am 11.10.19 um 21:31 schrieb Florian Fainelli:
>> On 10/11/19 11:48 AM, matthias....@kernel.org wrote:
>>> From: Matthias Brugger <mbrug...@suse.com>
>>>
>>> Enable Gigabit Ethernet support on the Raspberry Pi 4
>>> Model B.
>>>
>>> Signed-off-by: Matthias Brugger <mbrug...@suse.com>
>>>
>>> ---
>>>
>>> arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 22 ++++++++++++++++++++++
>>> arch/arm/boot/dts/bcm2711.dtsi | 18 ++++++++++++++++++
>>> 2 files changed, 40 insertions(+)
>>>
>>> diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
>>> b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
>>> index cccc1ccd19be..958553d62670 100644
>>> --- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
>>> +++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
>>> @@ -97,6 +97,28 @@
>>> status = "okay";
>>> };
>>>
>>> +&genet {
>>> + phy-handle = <&phy1>;
>>> + phy-mode = "rgmii";
>> Can you check that things still work against David Miller's net-next?
>> Tree, in particular the BCM54213PE PHY might be matched by the BCM54210E
>> entry in drivers/net/phy/broadcom.c and I just fixed an issue in how
>> RGMII delays were configured:
>>
>> https://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git/commit/?id=fea7fda7f50a6059220f83251e70709e45cc8040
>>
>> This might require you to change the 'phy-mode' property to what is
>> appropriate.
>
> since i didn't get a reply from the Pi folks yet, i tried all the other
> rgmii variants on top of this branch [1].
>
> But none of them worked.
>
> In case of "rgmii-id" i'm getting:
>
> unknown phy mode: 9
>
> and for "rgmii-rxid":
>
> unknown phy mode: 10
>
> In those cases the PHY didn't even probe. Did i missed something?
Well the GENET driver can only deal with two specific RGMII modes, so
you would need something like this:
diff --git a/drivers/net/ethernet/broadcom/genet/bcmmii.c
b/drivers/net/ethernet/broadcom/genet/bcmmii.c
index 970e478a9017..a12656cccf89 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmmii.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c
@@ -241,6 +241,8 @@ int bcmgenet_mii_config(struct net_device *dev, bool
init)
id_mode_dis = BIT(16);
/* fall through */
case PHY_INTERFACE_MODE_RGMII_TXID:
+ case PHY_INTERFACE_MODE_RGMII_RXID:
+ case PHY_INTERFACE_MODE_RGMII_ID:
if (id_mode_dis)
phy_name = "external RGMII (no delay)";
else
>
> [1] - https://github.com/lategoodbye/rpi-zero/commits/bcm2711-genet
>
--
Florian
