On Mon, Oct 07, 2019 at 02:41:41PM +0300, Roger Quadros wrote:
> TI platforms have a wrapper module around the Cadence USB3
> controller. Add binding information for that.
>
> Signed-off-by: Roger Quadros <[email protected]>
> Signed-off-by: Sekhar Nori <[email protected]>
> ---
> .../devicetree/bindings/usb/cdns-usb3-ti.txt | 59 +++++++++++++++++++
> 1 file changed, 59 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/usb/cdns-usb3-ti.txt
Please convert to DT schema.
> diff --git a/Documentation/devicetree/bindings/usb/cdns-usb3-ti.txt
> b/Documentation/devicetree/bindings/usb/cdns-usb3-ti.txt
> new file mode 100644
> index 000000000000..12c7c903e6da
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/cdns-usb3-ti.txt
> @@ -0,0 +1,59 @@
> +Binding for the TI specific wrapper for the Cadence USBSS-DRD controller
> +
> +Required properties:
> + - compatible: Should contain "ti,j721e-usb"
> + - reg: Physical base address and size of the wrappers register area.
> + - power-domains: Should contain a phandle to a PM domain provider node
> + and an args specifier containing the USB device id
> + value. This property is as per the binding documentation:
> + Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
> + - clocks: Clock phandles to usb2_refclk and lpm_clk
> + - clock-names: Should contain "usb2_refclk" and "lpm_clk"
_clk is redundant. 'ref' amd 'lpm' is sufficient.
> +
> +Optional properties:
> + - ti,usb2-only: If present, it restricts the controller to USB2.0 mode of
> + operation. Must be present if USB3 PHY is not available
> + for USB.
Seems like this should be discoverable based on describing the phy
connections.
> + - ti,modestrap-host: Set controller modestrap to HOST mode.
> + - ti,modestrap-peripheral: Set controller modestrap to PERIPHERAL mode.
What does modestrap mean? Fixed to the mode or that's the default? For
default, John Stultz sent a similar binding. Seems we need something
common.
> + - ti,vbus-divider: Should be present if USB VBUS line is connected to the
> + VBUS pin of the SoC via a 1/3 voltage divider.
> +
> +Sub-nodes:
> +The USB2 PHY and the Cadence USB3 controller should be the sub-nodes.
> +
> +Example:
> +
> + ti_usb0: cdns_usb@4104000 {
> + compatible = "ti,j721e-usb";
> + reg = <0x00 0x4104000 0x00 0x100>;
> + power-domains = <&k3_pds 288 TI_SCI_PD_EXCLUSIVE>;
> + clocks = <&k3_clks 288 15>, <&k3_clks 288 3>;
> + clock-names = "usb2_refclk", "lpm_clk";
> + assigned-clocks = <&k3_clks 288 15>; /* USB2_REFCLK */
> + assigned-clock-parents = <&k3_clks 288 16>; /* HFOSC0 */
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + phy@4108000 {
> + compatible = "ti,j721e-usb2-phy";
> + reg = <0x00 0x4108000 0x00 0x400>;
> + };
Why is this a child node? Use the phy binding.
> +
> + usb0: usb@6000000 {
> + compatible = "cdns,usb3-1.0.1";
Not documented.
> + reg = <0x00 0x6000000 0x00 0x10000>,
> + <0x00 0x6010000 0x00 0x10000>,
> + <0x00 0x6020000 0x00 0x10000>;
> + reg-names = "otg", "xhci", "dev";
> + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, /*
> irq.0 */
> + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, /*
> irq.6 */
> + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; /*
> otgirq.0 */
> + interrupt-names = "host",
> + "peripheral",
> + "otg";
> + maximum-speed = "super-speed";
> + dr_mode = "otg";
> + };
> + };
> --
> Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
> Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
>
