Thanks to the recent change in this driver, it is now possible to prevent using the CS0 with GPIO during setup. It then allows to remove the special handling of this case in the cs_activate() and cs_deactivate() functions.
Signed-off-by: Gregory CLEMENT <[email protected]> --- drivers/spi/spi-atmel.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c index ac5e2ddf9e1b..d88e2aa64839 100644 --- a/drivers/spi/spi-atmel.c +++ b/drivers/spi/spi-atmel.c @@ -371,7 +371,7 @@ static void cs_activate(struct atmel_spi *as, struct spi_device *spi) mr = spi_readl(as, MR); mr = SPI_BFINS(PCS, ~(1 << chip_select), mr); - if (spi->cs_gpiod && spi->chip_select != 0) + if (spi->cs_gpiod) gpiod_set_value(spi->cs_gpiod, 1); spi_writel(as, MR, mr); } @@ -402,7 +402,7 @@ static void cs_deactivate(struct atmel_spi *as, struct spi_device *spi) if (!spi->cs_gpiod) spi_writel(as, CR, SPI_BIT(LASTXFER)); - else if (atmel_spi_is_v2(as) || spi->chip_select != 0) + else gpiod_set_value(spi->cs_gpiod, 0); } @@ -1193,7 +1193,16 @@ static void initialize_native_cs_for_gpio(struct atmel_spi *as) if (!master->cs_gpiods) return; /* No CS GPIO */ - for (i = 0; i < 4; i++) + /* + * On the first version of the controller (AT91RM9200), CS0 + * can't be used associated with GPIO + */ + if (atmel_spi_is_v2(as)) + i = 0; + else + i = 1; + + for (; i < 4; i++) if (master->cs_gpiods[i]) as->native_cs_free |= BIT(i); -- 2.23.0
