Hi, Shawn
Dmitry has picked up the #1 and #2 patch, would you please pick up #3 ~
#5, thanks.
Anson
> Subject: [PATCH V6 3/5] arm64: dts: imx8qxp: Add scu key node
>
> Add scu key node for i.MX8QXP, disabled by default as it depends on board
> design.
>
> Signed-off-by: Anson Huang <[email protected]>
> ---
> Changes since V5:
> - use "linux,keycodes" instead of "linux,keycode".
> ---
> arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> index 1133b41..2d69f1a 100644
> --- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> @@ -8,6 +8,7 @@
> #include <dt-bindings/clock/imx8-clock.h> #include <dt-
> bindings/firmware/imx/rsrc.h> #include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> #include <dt-bindings/pinctrl/pads-imx8qxp.h>
>
> @@ -174,6 +175,12 @@
> #power-domain-cells = <1>;
> };
>
> + scu_key: scu-key {
> + compatible = "fsl,imx8qxp-sc-key", "fsl,imx-sc-key";
> + linux,keycodes = <KEY_POWER>;
> + status = "disabled";
> + };
> +
> rtc: rtc {
> compatible = "fsl,imx8qxp-sc-rtc";
> };
> --
> 2.7.4
