From: Stefan Popa <[email protected]> [ Upstream commit d202ce4787e446556c6b9d01f84734c3f8174ba3 ]
Currently, the driver sets the FIFO_SAMPLES register with the number of sample sets (maximum of 170 for 3 axis data, 256 for 2-axis and 512 for single axis). However, the FIFO_SAMPLES register should store the number of samples, regardless of how the FIFO format is configured. Signed-off-by: Stefan Popa <[email protected]> Fixes: f4f55ce38e5f ("iio:adxl372: Add FIFO and interrupts support") Cc: <[email protected]> Signed-off-by: Jonathan Cameron <[email protected]> Signed-off-by: Sasha Levin <[email protected]> --- drivers/iio/accel/adxl372.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/iio/accel/adxl372.c b/drivers/iio/accel/adxl372.c index 055227cb3d43c..863fe61a371fb 100644 --- a/drivers/iio/accel/adxl372.c +++ b/drivers/iio/accel/adxl372.c @@ -474,12 +474,17 @@ static int adxl372_configure_fifo(struct adxl372_state *st) if (ret < 0) return ret; - fifo_samples = st->watermark & 0xFF; + /* + * watermark stores the number of sets; we need to write the FIFO + * registers with the number of samples + */ + fifo_samples = (st->watermark * st->fifo_set_size); fifo_ctl = ADXL372_FIFO_CTL_FORMAT_MODE(st->fifo_format) | ADXL372_FIFO_CTL_MODE_MODE(st->fifo_mode) | - ADXL372_FIFO_CTL_SAMPLES_MODE(st->watermark); + ADXL372_FIFO_CTL_SAMPLES_MODE(fifo_samples); - ret = regmap_write(st->regmap, ADXL372_FIFO_SAMPLES, fifo_samples); + ret = regmap_write(st->regmap, + ADXL372_FIFO_SAMPLES, fifo_samples & 0xFF); if (ret < 0) return ret; -- 2.20.1
