On 2019/10/22 下午5:52, Tiwei Bie wrote:
This patch introduces a mdev based hardware vhost backend.
This backend is built on top of the same abstraction used
in virtio-mdev and provides a generic vhost interface for
userspace to accelerate the virtio devices in guest.
This backend is implemented as a mdev device driver on top
of the same mdev device ops used in virtio-mdev but using
a different mdev class id, and it will register the device
as a VFIO device for userspace to use. Userspace can setup
the IOMMU with the existing VFIO container/group APIs and
then get the device fd with the device name. After getting
the device fd of this device, userspace can use vhost ioctls
to setup the backend.
Signed-off-by: Tiwei Bie <tiwei....@intel.com>
---
This patch depends on below series:
https://lkml.org/lkml/2019/10/17/286
v1 -> v2:
- Replace _SET_STATE with _SET_STATUS (MST);
- Check status bits at each step (MST);
- Report the max ring size and max number of queues (MST);
- Add missing MODULE_DEVICE_TABLE (Jason);
- Only support the network backend w/o multiqueue for now;
Any idea on how to extend it to support devices other than net? I think
we want a generic API or an API that could be made generic in the future.
Do we want to e.g having a generic vhost mdev for all kinds of devices
or introducing e.g vhost-net-mdev and vhost-scsi-mdev?
- Some minor fixes and improvements;
- Rebase on top of virtio-mdev series v4;
RFC v4 -> v1:
- Implement vhost-mdev as a mdev device driver directly and
connect it to VFIO container/group. (Jason);
- Pass ring addresses as GPAs/IOVAs in vhost-mdev to avoid
meaningless HVA->GPA translations (Jason);
RFC v3 -> RFC v4:
- Build vhost-mdev on top of the same abstraction used by
virtio-mdev (Jason);
- Introduce vhost fd and pass VFIO fd via SET_BACKEND ioctl (MST);
RFC v2 -> RFC v3:
- Reuse vhost's ioctls instead of inventing a VFIO regions/irqs
based vhost protocol on top of vfio-mdev (Jason);
RFC v1 -> RFC v2:
- Introduce a new VFIO device type to build a vhost protocol
on top of vfio-mdev;
drivers/vfio/mdev/mdev_core.c | 12 +
drivers/vhost/Kconfig | 9 +
drivers/vhost/Makefile | 3 +
drivers/vhost/mdev.c | 415 ++++++++++++++++++++++++++++++++++
include/linux/mdev.h | 3 +
include/uapi/linux/vhost.h | 13 ++
6 files changed, 455 insertions(+)
create mode 100644 drivers/vhost/mdev.c
diff --git a/drivers/vfio/mdev/mdev_core.c b/drivers/vfio/mdev/mdev_core.c
index 5834f6b7c7a5..2963f65e6648 100644
--- a/drivers/vfio/mdev/mdev_core.c
+++ b/drivers/vfio/mdev/mdev_core.c
@@ -69,6 +69,18 @@ void mdev_set_virtio_ops(struct mdev_device *mdev,
}
EXPORT_SYMBOL(mdev_set_virtio_ops);
+/* Specify the vhost device ops for the mdev device, this
+ * must be called during create() callback for vhost mdev device.
+ */
+void mdev_set_vhost_ops(struct mdev_device *mdev,
+ const struct virtio_mdev_device_ops *vhost_ops)
+{
+ WARN_ON(mdev->class_id);
+ mdev->class_id = MDEV_CLASS_ID_VHOST;
+ mdev->device_ops = vhost_ops;
+}
+EXPORT_SYMBOL(mdev_set_vhost_ops);
+
const void *mdev_get_dev_ops(struct mdev_device *mdev)
{
return mdev->device_ops;
diff --git a/drivers/vhost/Kconfig b/drivers/vhost/Kconfig
index 3d03ccbd1adc..7b5c2f655af7 100644
--- a/drivers/vhost/Kconfig
+++ b/drivers/vhost/Kconfig
@@ -34,6 +34,15 @@ config VHOST_VSOCK
To compile this driver as a module, choose M here: the module will be
called
vhost_vsock.
+config VHOST_MDEV
+ tristate "Vhost driver for Mediated devices"
+ depends on EVENTFD && VFIO && VFIO_MDEV
+ select VHOST
+ default n
+ ---help---
+ Say M here to enable the vhost_mdev module for use with
+ the mediated device based hardware vhost accelerators.
+
config VHOST
tristate
---help---
diff --git a/drivers/vhost/Makefile b/drivers/vhost/Makefile
index 6c6df24f770c..ad9c0f8c6d8c 100644
--- a/drivers/vhost/Makefile
+++ b/drivers/vhost/Makefile
@@ -10,4 +10,7 @@ vhost_vsock-y := vsock.o
obj-$(CONFIG_VHOST_RING) += vringh.o
+obj-$(CONFIG_VHOST_MDEV) += vhost_mdev.o
+vhost_mdev-y := mdev.o
+
obj-$(CONFIG_VHOST) += vhost.o
diff --git a/drivers/vhost/mdev.c b/drivers/vhost/mdev.c
new file mode 100644
index 000000000000..5f9cae61018c
--- /dev/null
+++ b/drivers/vhost/mdev.c
@@ -0,0 +1,415 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018-2019 Intel Corporation.
+ */
+
+#include <linux/compat.h>
+#include <linux/kernel.h>
+#include <linux/miscdevice.h>
+#include <linux/mdev.h>
+#include <linux/module.h>
+#include <linux/vfio.h>
+#include <linux/vhost.h>
+#include <linux/virtio_mdev.h>
+#include <linux/virtio_ids.h>
+
+#include "vhost.h"
+
+/* Currently, only network backend w/o multiqueue is supported. */
+#define VHOST_MDEV_VQ_MAX 2
+
+struct vhost_mdev {
+ /* The lock is to protect this structure. */
+ struct mutex mutex;
+ struct vhost_dev dev;
+ struct vhost_virtqueue *vqs;
+ int nvqs;
+ u64 status;
+ u64 features;
+ u64 acked_features;
+ bool opened;
+ struct mdev_device *mdev;
+};
+
+static void handle_vq_kick(struct vhost_work *work)
+{
+ struct vhost_virtqueue *vq = container_of(work, struct vhost_virtqueue,
+ poll.work);
+ struct vhost_mdev *m = container_of(vq->dev, struct vhost_mdev, dev);
+ const struct virtio_mdev_device_ops *ops = mdev_get_dev_ops(m->mdev);
+
+ ops->kick_vq(m->mdev, vq - m->vqs);
+}
+
+static irqreturn_t vhost_mdev_virtqueue_cb(void *private)
+{
+ struct vhost_virtqueue *vq = private;
+ struct eventfd_ctx *call_ctx = vq->call_ctx;
+
+ if (call_ctx)
+ eventfd_signal(call_ctx, 1);
+ return IRQ_HANDLED;
+}
+
+static void vhost_mdev_reset(struct vhost_mdev *m)
+{
+ struct mdev_device *mdev = m->mdev;
+ const struct virtio_mdev_device_ops *ops = mdev_get_dev_ops(mdev);
+
+ m->status = 0;
+ return ops->set_status(mdev, m->status);
+}
+
+static long vhost_mdev_get_status(struct vhost_mdev *m, u8 __user *statusp)
+{
+ const struct virtio_mdev_device_ops *ops = mdev_get_dev_ops(m->mdev);
+ struct mdev_device *mdev = m->mdev;
+ u8 status;
+
+ status = ops->get_status(mdev);
+ m->status = status;
+
+ if (copy_to_user(statusp, &status, sizeof(status)))
+ return -EFAULT;
+
+ return 0;
+}
+
+static long vhost_mdev_set_status(struct vhost_mdev *m, u8 __user *statusp)
+{
+ const struct virtio_mdev_device_ops *ops = mdev_get_dev_ops(m->mdev);
+ struct mdev_device *mdev = m->mdev;
+ u8 status;
+
+ if (copy_from_user(&status, statusp, sizeof(status)))
+ return -EFAULT;
+
+ /*
+ * Userspace shouldn't remove status bits unless reset the
+ * status to 0.
+ */
+ if (status != 0 && (m->status & ~status) != 0)
+ return -EINVAL;
We don't cache vq ready information but we cache status and features
here, any reason for this?
+
+ ops->set_status(mdev, status);
+ m->status = ops->get_status(mdev);
+
+ return 0;
+}
+
+static long vhost_mdev_get_features(struct vhost_mdev *m, u64 __user *featurep)
+{
+ if (copy_to_user(featurep, &m->features, sizeof(m->features)))
+ return -EFAULT;
As discussed in previous version do we need to filter out MQ feature here?
+ return 0;
+}
+
+static long vhost_mdev_set_features(struct vhost_mdev *m, u64 __user *featurep)
+{
+ const struct virtio_mdev_device_ops *ops = mdev_get_dev_ops(m->mdev);
+ struct mdev_device *mdev = m->mdev;
+ u64 features;
+
+ /*
+ * It's not allowed to change the features after they have
+ * been negotiated.
+ */
+ if (m->status & VIRTIO_CONFIG_S_FEATURES_OK)
+ return -EPERM;
-EBUSY?
+
+ if (copy_from_user(&features, featurep, sizeof(features)))
+ return -EFAULT;
+
+ if (features & ~m->features)
+ return -EINVAL;
+
+ m->acked_features = features;
+ if (ops->set_features(mdev, m->acked_features))
+ return -ENODEV;
-EINVAL should be better, this would be more obvious for parent that
wants to force any feature.
+
+ return 0;
+}
+
+static long vhost_mdev_get_vring_num(struct vhost_mdev *m, u16 __user *argp)
+{
+ const struct virtio_mdev_device_ops *ops = mdev_get_dev_ops(m->mdev);
+ struct mdev_device *mdev = m->mdev;
+ u16 num;
+
+ num = ops->get_vq_num_max(mdev);
+
+ if (copy_to_user(argp, &num, sizeof(num)))
+ return -EFAULT;
+ return 0;
+}
+
+static long vhost_mdev_get_queue_num(struct vhost_mdev *m, u32 __user *argp)
+{
+ u32 nvqs = m->nvqs;
+
+ if (copy_to_user(argp, &nvqs, sizeof(nvqs)))
+ return -EFAULT;
+ return 0;
+}
+
+static long vhost_mdev_vring_ioctl(struct vhost_mdev *m, unsigned int cmd,
+ void __user *argp)
+{
+ const struct virtio_mdev_device_ops *ops = mdev_get_dev_ops(m->mdev);
+ struct mdev_device *mdev = m->mdev;
+ struct virtio_mdev_callback cb;
+ struct vhost_virtqueue *vq;
+ struct vhost_vring_state s;
+ u32 idx;
+ long r;
+
+ r = get_user(idx, (u32 __user *)argp);
+ if (r < 0)
+ return r;
+ if (idx >= m->nvqs)
+ return -ENOBUFS;
+
+ /*
+ * It's not allowed to detect and program vqs before
+ * features negotiation or after enabling driver.
+ */
+ if (!(m->status & VIRTIO_CONFIG_S_FEATURES_OK) ||
+ (m->status & VIRTIO_CONFIG_S_DRIVER_OK))
+ return -EPERM;
So the question is: is it better to do this in parent or not?
+
+ vq = &m->vqs[idx];
+
+ if (cmd == VHOST_MDEV_SET_VRING_ENABLE) {
+ if (copy_from_user(&s, argp, sizeof(s)))
+ return -EFAULT;
+ ops->set_vq_ready(mdev, idx, s.num);
+ return 0;
+ }
+
+ /*
+ * It's not allowed to detect and program vqs with
+ * vqs enabled.
+ */
+ if (ops->get_vq_ready(mdev, idx))
+ return -EPERM;
+
+ if (cmd == VHOST_GET_VRING_BASE)
+ vq->last_avail_idx = ops->get_vq_state(m->mdev, idx);
+
+ r = vhost_vring_ioctl(&m->dev, cmd, argp);
+ if (r)
+ return r;
+
+ switch (cmd) {
+ case VHOST_SET_VRING_ADDR:
+ /*
+ * In vhost-mdev, the ring addresses set by userspace should
+ * be the DMA addresses within the VFIO container/group.
+ */
+ if (ops->set_vq_address(mdev, idx, (u64)vq->desc,
+ (u64)vq->avail, (u64)vq->used))
+ r = -ENODEV;
+ break;
+
+ case VHOST_SET_VRING_BASE:
+ if (ops->set_vq_state(mdev, idx, vq->last_avail_idx))
+ r = -ENODEV;
+ break;
+
+ case VHOST_SET_VRING_CALL:
+ if (vq->call_ctx) {
+ cb.callback = vhost_mdev_virtqueue_cb;
+ cb.private = vq;
+ } else {
+ cb.callback = NULL;
+ cb.private = NULL;
+ }
+ ops->set_vq_cb(mdev, idx, &cb);
+ break;
+
+ case VHOST_SET_VRING_NUM:
+ ops->set_vq_num(mdev, idx, vq->num);
+ break;
+ }
+
+ return r;
+}
+
+static int vhost_mdev_open(void *device_data)
+{
+ struct vhost_mdev *m = device_data;
+ struct vhost_dev *dev;
+ struct vhost_virtqueue **vqs;
+ int nvqs, i, r;
+
+ if (!try_module_get(THIS_MODULE))
+ return -ENODEV;
+
+ mutex_lock(&m->mutex);
+
+ if (m->opened) {
+ r = -EBUSY;
+ goto err;
+ }
+
+ nvqs = m->nvqs;
+ vhost_mdev_reset(m);
+
+ memset(&m->dev, 0, sizeof(m->dev));
+ memset(m->vqs, 0, nvqs * sizeof(struct vhost_virtqueue));
+
+ vqs = kmalloc_array(nvqs, sizeof(*vqs), GFP_KERNEL);
+ if (!vqs) {
+ r = -ENOMEM;
+ goto err;
+ }
+
+ dev = &m->dev;
+ for (i = 0; i < nvqs; i++) {
+ vqs[i] = &m->vqs[i];
+ vqs[i]->handle_kick = handle_vq_kick;
+ }
+ vhost_dev_init(dev, vqs, nvqs, 0, 0, 0);
+ m->opened = true;
+ mutex_unlock(&m->mutex);
+
+ return 0;
+
+err:
+ mutex_unlock(&m->mutex);
+ module_put(THIS_MODULE);
+ return r;
+}
+
+static void vhost_mdev_release(void *device_data)
+{
+ struct vhost_mdev *m = device_data;
+
+ mutex_lock(&m->mutex);
+ vhost_mdev_reset(m);
+ vhost_dev_stop(&m->dev);
+ vhost_dev_cleanup(&m->dev);
+
+ kfree(m->dev.vqs);
+ m->opened = false;
+ mutex_unlock(&m->mutex);
+ module_put(THIS_MODULE);
+}
+
+static long vhost_mdev_unlocked_ioctl(void *device_data,
+ unsigned int cmd, unsigned long arg)
+{
+ struct vhost_mdev *m = device_data;
+ void __user *argp = (void __user *)arg;
+ long r;
+
+ mutex_lock(&m->mutex);
+
+ switch (cmd) {
+ case VHOST_MDEV_GET_STATUS:
+ r = vhost_mdev_get_status(m, argp);
+ break;
+ case VHOST_MDEV_SET_STATUS:
+ r = vhost_mdev_set_status(m, argp);
+ break;
+ case VHOST_GET_FEATURES:
+ r = vhost_mdev_get_features(m, argp);
+ break;
+ case VHOST_SET_FEATURES:
+ r = vhost_mdev_set_features(m, argp);
+ break;
+ case VHOST_MDEV_GET_VRING_NUM:
+ r = vhost_mdev_get_vring_num(m, argp);
+ break;
+ case VHOST_MDEV_GET_QUEUE_NUM:
+ r = vhost_mdev_get_queue_num(m, argp);
+ break;
It's not clear to me that how this API will be used by userspace? I
think e.g features without MQ implies the queue num here.
+ default:
+ r = vhost_dev_ioctl(&m->dev, cmd, argp);
I believe having SET_MEM_TABLE/SET_LOG_BASE/SET_LOG_FD is for future
support of those features. If it's true need add some comments on this.
+ if (r == -ENOIOCTLCMD)
+ r = vhost_mdev_vring_ioctl(m, cmd, argp);
+ }
+
+ mutex_unlock(&m->mutex);
+ return r;
+}
+
+static const struct vfio_device_ops vfio_vhost_mdev_dev_ops = {
+ .name = "vfio-vhost-mdev",
+ .open = vhost_mdev_open,
+ .release = vhost_mdev_release,
+ .ioctl = vhost_mdev_unlocked_ioctl,
+};
+
+static int vhost_mdev_probe(struct device *dev)
+{
+ struct mdev_device *mdev = mdev_from_dev(dev);
+ const struct virtio_mdev_device_ops *ops = mdev_get_dev_ops(mdev);
+ struct vhost_mdev *m;
+ int nvqs, r;
+
+ /* Currently, only network backend is supported. */
+ if (ops->get_device_id(mdev) != VIRTIO_ID_NET)
+ return -ENOTSUPP;
If we decide to go with the way of vhost-net-mdev, probably need
something smarter. E.g a vhost bus etc.
+
+ if (ops->get_mdev_features(mdev) != VIRTIO_MDEV_F_VERSION_1)
+ return -ENOTSUPP;
+
+ m = devm_kzalloc(dev, sizeof(*m), GFP_KERNEL | __GFP_RETRY_MAYFAIL);
+ if (!m)
+ return -ENOMEM;
+
+ nvqs = VHOST_MDEV_VQ_MAX;
+ m->nvqs = nvqs;
+
+ m->vqs = devm_kmalloc_array(dev, nvqs, sizeof(struct vhost_virtqueue),
+ GFP_KERNEL);
+ if (!m->vqs)
+ return -ENOMEM;
Is it better to move those allocation to open? Otherwise the memset
there seems strange.
+
+ r = vfio_add_group_dev(dev, &vfio_vhost_mdev_dev_ops, m);
+ if (r)
+ return r;
+
+ mutex_init(&m->mutex);
+ m->features = ops->get_features(mdev);
+ m->mdev = mdev;
+ return 0;
+}
+
+static void vhost_mdev_remove(struct device *dev)
+{
+ struct vhost_mdev *m;
+
+ m = vfio_del_group_dev(dev);
+ mutex_destroy(&m->mutex);
+}
+
+static const struct mdev_class_id vhost_mdev_match[] = {
+ { MDEV_CLASS_ID_VHOST },
+ { 0 },
+};
+MODULE_DEVICE_TABLE(mdev, vhost_mdev_match);
+
+static struct mdev_driver vhost_mdev_driver = {
+ .name = "vhost_mdev",
+ .probe = vhost_mdev_probe,
+ .remove = vhost_mdev_remove,
+ .id_table = vhost_mdev_match,
+};
+
+static int __init vhost_mdev_init(void)
+{
+ return mdev_register_driver(&vhost_mdev_driver, THIS_MODULE);
+}
+module_init(vhost_mdev_init);
+
+static void __exit vhost_mdev_exit(void)
+{
+ mdev_unregister_driver(&vhost_mdev_driver);
+}
+module_exit(vhost_mdev_exit);
+
+MODULE_VERSION("0.0.1");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Mediated device based accelerator for virtio");
diff --git a/include/linux/mdev.h b/include/linux/mdev.h
index 13e045e09d3b..6060cdbe6d3e 100644
--- a/include/linux/mdev.h
+++ b/include/linux/mdev.h
@@ -114,6 +114,8 @@ void mdev_set_vfio_ops(struct mdev_device *mdev,
const struct vfio_mdev_device_ops *vfio_ops);
void mdev_set_virtio_ops(struct mdev_device *mdev,
const struct virtio_mdev_device_ops *virtio_ops);
+void mdev_set_vhost_ops(struct mdev_device *mdev,
+ const struct virtio_mdev_device_ops *vhost_ops);
const void *mdev_get_dev_ops(struct mdev_device *mdev);
extern struct bus_type mdev_bus_type;
@@ -131,6 +133,7 @@ struct mdev_device *mdev_from_dev(struct device *dev);
enum {
MDEV_CLASS_ID_VFIO = 1,
MDEV_CLASS_ID_VIRTIO = 2,
+ MDEV_CLASS_ID_VHOST = 3,
/* New entries must be added here */
};
diff --git a/include/uapi/linux/vhost.h b/include/uapi/linux/vhost.h
index 40d028eed645..dad3c62bd91b 100644
--- a/include/uapi/linux/vhost.h
+++ b/include/uapi/linux/vhost.h
@@ -116,4 +116,17 @@
#define VHOST_VSOCK_SET_GUEST_CID _IOW(VHOST_VIRTIO, 0x60, __u64)
#define VHOST_VSOCK_SET_RUNNING _IOW(VHOST_VIRTIO, 0x61, int)
+/* VHOST_MDEV specific defines */
+
+/* Get and set the status of the backend. The status bits follow the
+ * same definition of the device status defined in virtio-spec. */
+#define VHOST_MDEV_GET_STATUS _IOW(VHOST_VIRTIO, 0x70, __u8)
+#define VHOST_MDEV_SET_STATUS _IOW(VHOST_VIRTIO, 0x71, __u8)
+/* Enable/disable the ring. */
+#define VHOST_MDEV_SET_VRING_ENABLE _IOW(VHOST_VIRTIO, 0x72, struct
vhost_vring_state)
+/* Get the max ring size. */
+#define VHOST_MDEV_GET_VRING_NUM _IOW(VHOST_VIRTIO, 0x73, __u16)
+/* Get the max number of queues. */
+#define VHOST_MDEV_GET_QUEUE_NUM _IOW(VHOST_VIRTIO, 0x74, __u32)
Do we need API for userspace to get backend capability? (that calls
get_mdev_device_features())
Thanks
+
#endif
