Hi,

On Mon, 14 Oct 2019 08:30:02 -0700
Randy Dunlap <rdun...@infradead.org> wrote:

> On 10/13/19 11:47 PM, Stephen Rothwell wrote:
> > Hi all,
> > 
> > Changes since 20191011:
> > 
> 
> on x86_64:
> 
>   HOSTCC  arch/x86/tools/insn_decoder_test
>   HOSTCC  arch/x86/tools/insn_sanity
>   TEST    posttest
> arch/x86/tools/insn_decoder_test: warning: Found an x86 instruction decoder 
> bug, please report this.
> arch/x86/tools/insn_decoder_test: warning: ffffffff81000bf1:  f7 0b 00 01 08 
> 00       testl  $0x80100,(%rbx)
> arch/x86/tools/insn_decoder_test: warning: objdump says 6 bytes, but 
> insn_get_length() says 2
> arch/x86/tools/insn_decoder_test: warning: Decoded and checked 11913894 
> instructions with 1 failures
>   TEST    posttest
> arch/x86/tools/insn_sanity: Success: decoded and checked 1000000 random 
> instructions with 0 errors (seed:0x871ce29c)

Hmm, curious.

x86-opcode-map.txt said,
f7: Grp3_2 Ev (1A)

and "0x0b" is 00001011b, Group encoding bits are 5,4,3 (reg field),
so group index is 001.

GrpTable: Grp3_2
0: TEST Ev,Iz
1:

Hmm, "f7 0b" is not assigned to any instruction... (testl should be f7 03)

I've checked Intel SDM May 2019 version(*), but the Opcode Map (Table A-6. 
Opecode
Extensions for One- and Two-byte Opecodes by Group Number) showed the group 
index
001 is still blank. I've also checked that Table B-13 (General Purpose 
Instruction
 Formats and Encodings for Non-64-Bit Modes (Note that this has no REX prefix)) 
but
I couldn't find "f7 0b".

At last, I found that on AMD64 Architecture Programmer's Manual Volume 3, 
Appendix A.2
Table A-6. ModRM.reg Extensions for the Primary Opcode Map(**), which shows 
that both
f7 + reg=000 and f7 + reg=001 are same. So only on AMD64, it is officially 
available
instruction.

(*) 
https://software.intel.com/sites/default/files/managed/a4/60/325383-sdm-vol-2abcd.pdf
(**) https://www.amd.com/system/files/TechDocs/24594.pdf

OK, so this should be fixed with below patch.

------
>From b3f45b86df25be59fcf417730ab4c69c6310eaad Mon Sep 17 00:00:00 2001
From: Masami Hiramatsu <mhira...@kernel.org>
Date: Wed, 23 Oct 2019 14:45:35 +0900
Subject: [PATCH] x86/decoder: Add TEST opcode to Group3-2

Add TEST opcode to Group3-2 reg=001b as same as Group3-1 does.

Commit 12a78d43de76 ("x86/decoder: Add new TEST instruction pattern")
added a TEST opcode assignment to f6 XX/001/XXX (Group 3-1), but not
added f7 XX/001/XXX (Group 3-2). Actually these TEST opcode is not
described in Intel SDM Vol2, but described in AMD64 Architecture
Programmer's Manual Vol.3, Appendix A.2 Table A-6. ModRM.reg
Extensions for the Primary Opcode Map.

Without this fix, Randy found a warning by insn_decoder_test related
to this issue as below.

  HOSTCC  arch/x86/tools/insn_decoder_test
  HOSTCC  arch/x86/tools/insn_sanity
  TEST    posttest
arch/x86/tools/insn_decoder_test: warning: Found an x86 instruction decoder 
bug, please report this.
arch/x86/tools/insn_decoder_test: warning: ffffffff81000bf1:    f7 0b 00 01 08 
00       testl  $0x80100,(%rbx)
arch/x86/tools/insn_decoder_test: warning: objdump says 6 bytes, but 
insn_get_length() says 2
arch/x86/tools/insn_decoder_test: warning: Decoded and checked 11913894 
instructions with 1 failures
  TEST    posttest
arch/x86/tools/insn_sanity: Success: decoded and checked 1000000 random 
instructions with 0 errors (seed:0x871ce29c)

To fix this error, add TEST opcode according to AMD64 APM Vol.3.

Reported-by: Randy Dunlap <rdun...@infradead.org>
Signed-off-by: Masami Hiramatsu <mhira...@kernel.org>
---
 arch/x86/lib/x86-opcode-map.txt       | 2 +-
 tools/arch/x86/lib/x86-opcode-map.txt | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/x86/lib/x86-opcode-map.txt b/arch/x86/lib/x86-opcode-map.txt
index e0b85930dd77..4635ce298d1d 100644
--- a/arch/x86/lib/x86-opcode-map.txt
+++ b/arch/x86/lib/x86-opcode-map.txt
@@ -907,7 +907,7 @@ EndTable
 
 GrpTable: Grp3_2
 0: TEST Ev,Iz
-1:
+1: TEST Ev,Iz
 2: NOT Ev
 3: NEG Ev
 4: MUL rAX,Ev
diff --git a/tools/arch/x86/lib/x86-opcode-map.txt 
b/tools/arch/x86/lib/x86-opcode-map.txt
index e0b85930dd77..4635ce298d1d 100644
--- a/tools/arch/x86/lib/x86-opcode-map.txt
+++ b/tools/arch/x86/lib/x86-opcode-map.txt
@@ -907,7 +907,7 @@ EndTable
 
 GrpTable: Grp3_2
 0: TEST Ev,Iz
-1:
+1: TEST Ev,Iz
 2: NOT Ev
 3: NEG Ev
 4: MUL rAX,Ev
-- 
2.20.1
-- 
Masami Hiramatsu <mhira...@kernel.org>

Reply via email to