On Tue, Apr 28, 2020 at 10:44:28PM -0700, Prashant Malani wrote: > According to the PMC Type C Subsystem (TCSS) Mux programming guide rev > 0.6, when a device is transitioning to DP Alternate Mode state, if the > HPD_STATE (bit 7) field in the status update command VDO is set to > HPD_HIGH, the HPD_HIGH field in the Alternate Mode request “mode_data” > field (bit 14) should also be set. Ensure the bit is correctly handled > while issuing the Alternate Mode request. > > Signed-off-by: Prashant Malani <[email protected]> > Fixes: 6701adfa9693 ("usb: typec: driver for Intel PMC mux control")
Acked-by: Heikki Krogerus <[email protected]> > --- > > Changes in v2: > - Clarified the commit message to mention the proper field names. > > drivers/usb/typec/mux/intel_pmc_mux.c | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/drivers/usb/typec/mux/intel_pmc_mux.c > b/drivers/usb/typec/mux/intel_pmc_mux.c > index f5c5e0aef66f..c599112559e7 100644 > --- a/drivers/usb/typec/mux/intel_pmc_mux.c > +++ b/drivers/usb/typec/mux/intel_pmc_mux.c > @@ -157,6 +157,10 @@ pmc_usb_mux_dp(struct pmc_usb_port *port, struct > typec_mux_state *state) > req.mode_data |= (state->mode - TYPEC_STATE_MODAL) << > PMC_USB_ALTMODE_DP_MODE_SHIFT; > > + if (data->status & DP_STATUS_HPD_STATE) > + req.mode_data |= PMC_USB_DP_HPD_LVL << > + PMC_USB_ALTMODE_DP_MODE_SHIFT; > + > return pmc_usb_command(port, (void *)&req, sizeof(req)); > } > > -- > 2.26.2.303.gf8c07b1a785-goog thanks, -- heikki
