Move the max-link-speed property of the PCIe node from board specific device tree files to the generic armada-37xx.dtsi.
Armada 37xx supports only PCIe gen2 speed so max-link-speed property should be in the genetic armada-37xx.dtsi file. Signed-off-by: Pali Rohár <[email protected]> --- arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts | 1 - arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 1 + 2 files changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts index 15c1cf5c5b69..4cc735899c5d 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts @@ -132,7 +132,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>; status = "okay"; - max-link-speed = <2>; reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>; /* enabled by U-Boot if PCIe module is present */ diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi index 5aaad64a793d..2bbc69b4dc99 100644 --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -493,6 +493,7 @@ <0 0 0 2 &pcie_intc 1>, <0 0 0 3 &pcie_intc 2>, <0 0 0 4 &pcie_intc 3>; + max-link-speed = <2>; phys = <&comphy1 0>; pcie_intc: interrupt-controller { interrupt-controller; -- 2.20.1
