From: Jim Quinlan <[email protected]> Configuration Retry Request Status is off by default on this PCIe controller. Turn it on.
Signed-off-by: Jim Quinlan <[email protected]> --- drivers/pci/controller/pcie-brcmstb.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c index 5b0dec5971b8..2bc913c0262c 100644 --- a/drivers/pci/controller/pcie-brcmstb.c +++ b/drivers/pci/controller/pcie-brcmstb.c @@ -34,6 +34,9 @@ #define BRCM_PCIE_CAP_REGS 0x00ac /* Broadcom STB PCIe Register Offsets */ +#define PCIE_RC_CFG_PCIE_ROOT_CAP_CONTROL 0x00c8 +#define PCIE_RC_CFG_PCIE_ROOT_CAP_CONTROL_RC_CRS_EN_MASK 0x10 + #define PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1 0x0188 #define PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1_ENDIAN_MODE_BAR2_MASK 0xc #define PCIE_RC_CFG_VENDOR_SPCIFIC_REG1_LITTLE_ENDIAN 0x0 @@ -827,6 +830,12 @@ static int brcm_pcie_setup(struct brcm_pcie *pcie) pci_speed_string(pcie_link_speed[cls]), nlw, ssc_good ? "(SSC)" : "(!SSC)"); + /* Enable configuration request retry (CRS) */ + tmp = readl(base + PCIE_RC_CFG_PCIE_ROOT_CAP_CONTROL); + u32p_replace_bits(&tmp, 1, + PCIE_RC_CFG_PCIE_ROOT_CAP_CONTROL_RC_CRS_EN_MASK); + writel(tmp, base + PCIE_RC_CFG_PCIE_ROOT_CAP_CONTROL); + /* PCIe->SCB endian mode for BAR */ tmp = readl(base + PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1); u32p_replace_bits(&tmp, PCIE_RC_CFG_VENDOR_SPCIFIC_REG1_LITTLE_ENDIAN, -- 2.17.1
