On Thu, Apr 30, 2020 at 04:05:34PM +0200, Michal Orzel wrote:
> Check/fix all warnings generated by checkpatch.pl script on LM75 driver.
>
> Signed-off-by: Michal Orzel <michalorzel....@gmail.com>
Applied, but for the future please prepend your patches with something like
"subsystem: driver:", or for hwmon "hwmon: (driver)".
Also, please keep in mind that such cleanups are not encouraged unless you
also provide functional changes.
Thanks,
Guenter
> ---
> drivers/hwmon/lm75.c | 8 ++++++--
> drivers/hwmon/lm75.h | 31 +++++++++++++++++--------------
> 2 files changed, 23 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c
> index 5e63922..ba0be48 100644
> --- a/drivers/hwmon/lm75.c
> +++ b/drivers/hwmon/lm75.c
> @@ -797,8 +797,10 @@ static int lm75_detect(struct i2c_client *new_client,
>
> /* First check for LM75A */
> if (i2c_smbus_read_byte_data(new_client, 7) == LM75A_ID) {
> - /* LM75A returns 0xff on unused registers so
> - just to be sure we check for that too. */
> + /*
> + * LM75A returns 0xff on unused registers so
> + * just to be sure we check for that too.
> + */
> if (i2c_smbus_read_byte_data(new_client, 4) != 0xff
> || i2c_smbus_read_byte_data(new_client, 5) != 0xff
> || i2c_smbus_read_byte_data(new_client, 6) != 0xff)
> @@ -849,6 +851,7 @@ static int lm75_suspend(struct device *dev)
> {
> int status;
> struct i2c_client *client = to_i2c_client(dev);
> +
> status = i2c_smbus_read_byte_data(client, LM75_REG_CONF);
> if (status < 0) {
> dev_dbg(&client->dev, "Can't read config? %d\n", status);
> @@ -863,6 +866,7 @@ static int lm75_resume(struct device *dev)
> {
> int status;
> struct i2c_client *client = to_i2c_client(dev);
> +
> status = i2c_smbus_read_byte_data(client, LM75_REG_CONF);
> if (status < 0) {
> dev_dbg(&client->dev, "Can't read config? %d\n", status);
> diff --git a/drivers/hwmon/lm75.h b/drivers/hwmon/lm75.h
> index b614e63..a398171 100644
> --- a/drivers/hwmon/lm75.h
> +++ b/drivers/hwmon/lm75.h
> @@ -1,17 +1,15 @@
> /* SPDX-License-Identifier: GPL-2.0-or-later */
> /*
> - lm75.h - Part of lm_sensors, Linux kernel modules for hardware
> - monitoring
> - Copyright (c) 2003 Mark M. Hoffman <mhoff...@lightlink.com>
> -
> -*/
> + * lm75.h - Part of lm_sensors, Linux kernel modules for hardware monitoring
> + * Copyright (c) 2003 Mark M. Hoffman <mhoff...@lightlink.com>
> + */
>
> /*
> - This file contains common code for encoding/decoding LM75 type
> - temperature readings, which are emulated by many of the chips
> - we support. As the user is unlikely to load more than one driver
> - which contains this code, we don't worry about the wasted space.
> -*/
> + * This file contains common code for encoding/decoding LM75 type
> + * temperature readings, which are emulated by many of the chips
> + * we support. As the user is unlikely to load more than one driver
> + * which contains this code, we don't worry about the wasted space.
> + */
>
> #include <linux/kernel.h>
>
> @@ -20,18 +18,23 @@
> #define LM75_TEMP_MAX 125000
> #define LM75_SHUTDOWN 0x01
>
> -/* TEMP: 0.001C/bit (-55C to +125C)
> - REG: (0.5C/bit, two's complement) << 7 */
> +/*
> + * TEMP: 0.001C/bit (-55C to +125C)
> + * REG: (0.5C/bit, two's complement) << 7
> + */
> static inline u16 LM75_TEMP_TO_REG(long temp)
> {
> int ntemp = clamp_val(temp, LM75_TEMP_MIN, LM75_TEMP_MAX);
> +
> ntemp += (ntemp < 0 ? -250 : 250);
> return (u16)((ntemp / 500) << 7);
> }
>
> static inline int LM75_TEMP_FROM_REG(u16 reg)
> {
> - /* use integer division instead of equivalent right shift to
> - guarantee arithmetic shift and preserve the sign */
> + /*
> + * use integer division instead of equivalent right shift to
> + * guarantee arithmetic shift and preserve the sign
> + */
> return ((s16)reg / 128) * 500;
> }
> --
> 2.7.4
>
