[PATCH 2/2] dt-bindings: thermal: tsens: Add zeroc interrupt support in yaml

[Manaf Meethalavalappu Pallikunhi]

Add 0C (zeroc) interrupt support for tsens in yaml.

Signed-off-by: Manaf Meethalavalappu Pallikunhi <man...@codeaurora.org>
---
 Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml 
b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
index 2ddd39d96766..8a0893f77d20 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
@@ -52,12 +52,14 @@ properties:
     items:
       - description: Combined interrupt if upper or lower threshold crossed
       - description: Interrupt if critical threshold crossed
+      - description: Interrupt if zeroC threshold is crossed
 
   interrupt-names:
     minItems: 1
     items:
       - const: uplow
       - const: critical
+      - const: zeroc
 
   nvmem-cells:
     minItems: 1
@@ -168,8 +170,9 @@ examples:
                  <0xc222000 0x1ff>;
 
            interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
-                        <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
-           interrupt-names = "uplow", "critical";
+                        <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>,
+                        <GIC_SPI 510 IRQ_TYPE_EDGE_RISING>;
+           interrupt-names = "uplow", "critical", "zeroc";
 
            #qcom,sensors = <13>;
            #thermal-sensor-cells = <1>;
-- 
2.26.2