A test with the command below gives for example this error:
arch/arm64/boot/dts/rockchip/rk3328-evb.dt.yaml: phy@0:
'#phy-cells' is a required property
The phy nodename is normally used by a phy-handle.
This node is however compatible with
"ethernet-phy-id1234.d400", "ethernet-phy-ieee802.3-c22"
which is just been added to 'ethernet-phy.yaml'.
So change nodename to 'ethernet-phy' for which '#phy-cells'
is not a required property
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/schemas/
phy/phy-provider.yaml
Signed-off-by: Johan Jonker <jbx6...@gmail.com>
---
Changes v2:
Reword commit message in the same way as in the patches for
'rk3228-evb.dts' and 'rk3229-xms6.dts'
that are already aproved.
Patch 2-6 of version 1 unchanged.
---
arch/arm64/boot/dts/rockchip/rk3328.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index 931a9279e..fdf0e1b26 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -935,7 +935,7 @@
#address-cells = <1>;
#size-cells = <0>;
- phy: phy@0 {
+ phy: ethernet-phy@0 {
compatible = "ethernet-phy-id1234.d400",
"ethernet-phy-ieee802.3-c22";
reg = <0>;
clocks = <&cru SCLK_MAC2PHY_OUT>;
--
2.11.0
