From: Serge Semin <[email protected]> Similar to commit 8e5c62e38a88 ("mips: early_printk_8250: Use offset-sized IO-mem accessors") the IO-memory might require to use a proper load/store instructions (like Bailal-T1 IO-memory). To fix the cps-vec UART debug printout lets use the memory access instructions in accordance with the UART registers offset config specified at boot time.
Signed-off-by: Serge Semin <[email protected]> Cc: Alexey Malahov <[email protected]> Cc: Thomas Bogendoerfer <[email protected]> Cc: Paul Burton <[email protected]> Cc: Ralf Baechle <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Rob Herring <[email protected]> Cc: [email protected] Cc: [email protected] --- There might be another problem in cps-vec-ns16550.S connected with the difference in CPU/devices endinanness on some platforms. But there is no such for Baikal-T1 SoC. --- arch/mips/kernel/cps-vec-ns16550.S | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) diff --git a/arch/mips/kernel/cps-vec-ns16550.S b/arch/mips/kernel/cps-vec-ns16550.S index d5a67b4ce9f6..2adb1c56c7c5 100644 --- a/arch/mips/kernel/cps-vec-ns16550.S +++ b/arch/mips/kernel/cps-vec-ns16550.S @@ -14,16 +14,30 @@ #define UART_TX_OFS (UART_TX << CONFIG_MIPS_CPS_NS16550_SHIFT) #define UART_LSR_OFS (UART_LSR << CONFIG_MIPS_CPS_NS16550_SHIFT) +#if CONFIG_MIPS_CPS_NS16550_SHIFT == 0 +# define UART_L lb +# define UART_S sb +#elif CONFIG_MIPS_CPS_NS16550_SHIFT == 1 +# define UART_L lh +# define UART_S sh +#elif CONFIG_MIPS_CPS_NS16550_SHIFT == 2 +# define UART_L lw +# define UART_S sw +#else +# define UART_L lw +# define UART_S sb +#endif + /** * _mips_cps_putc() - write a character to the UART * @a0: ASCII character to write * @t9: UART base address */ LEAF(_mips_cps_putc) -1: lw t0, UART_LSR_OFS(t9) +1: UART_L t0, UART_LSR_OFS(t9) andi t0, t0, UART_LSR_TEMT beqz t0, 1b - sb a0, UART_TX_OFS(t9) + UART_S a0, UART_TX_OFS(t9) jr ra END(_mips_cps_putc) -- 2.25.1
