On Sat, 6 Oct 2007, Michael Tokarev wrote: [snip] > That to say - it may be some miscompilations, but may be some probs with > hardware itself. If you can, try to reproduce the same on another board > (I just tried to boot 2.6.23-rc5 on this machine, compiled for PIII CPU > using gcc-4.1.2 (no other version installed, sorry) - no issues so far).
Hm, well, I could only compile a i686 kernel and Intel chipset with "otherwise the same" config with these two compiler options to test... Maybe some time. No, I do not have another C7 system. > And no, I'm not trying to say "don't use ViA C7" etc -- I just love this > my box, it's very good, powerful enouth and quiet. Just be prepared for > some... issues, which happens - rarely but still. Well, this very system has been running git and compiling kernels for itself the whole day today without a single issue. The gcc-3.3.5 miscompiled kernel was compiled on another machine. So, I hope my specific sample is stable. And I need it to be stable, because I'm going to run my mail-server on it... BTW, compiled a tickless kernel on it, so far without looking into user-space after 12 min uptime 40290 timer interrupts, i.e., 17Hz, not bad. As for sensors - my system seems to have a w83627ehf chip, "sensors" output (under 2.6.22) looks pretty funny too: # sensors w83627ehf-i2c-9191-290 ERROR: Can't get adapter or algorithm?!? VCore: +0.98 V (min = +0.00 V, max = +1.74 V) in1: +12.41 V (min = +3.17 V, max = +9.24 V) ALARM AVCC: +3.26 V (min = +3.82 V, max = +1.79 V) ALARM 3VCC: +3.26 V (min = +2.86 V, max = +1.49 V) ALARM in4: +1.54 V (min = +1.38 V, max = +1.46 V) ALARM in5: +1.59 V (min = +2.04 V, max = +0.95 V) ALARM in6: +4.71 V (min = +4.48 V, max = +3.05 V) ALARM VSB: +3.26 V (min = +4.08 V, max = +4.08 V) ALARM VBAT: +3.20 V (min = +3.57 V, max = +3.02 V) ALARM in9: +1.59 V (min = +2.04 V, max = +2.01 V) ALARM Case Fan: 0 RPM (min = 3668 RPM, div = 16) ALARM CPU Fan: 0 RPM (min = 4440 RPM, div = 16) ALARM Aux Fan: 0 RPM (min = 3125 RPM, div = 16) ALARM fan5: 0 RPM (min = 0 RPM, div = 8) Sys Temp: +39C (high = -6C, hyst = -2C) ALARM CPU Temp: +43.0C (high = +100.0C, hyst = +95.0C) AUX Temp: +42.5C (high = +100.0C, hyst = +95.0C) Maybe at least CPU Temp. at least correlates with the real value:-) Yes, I'll look in BIOS next time I boot with a connected monitor and a keyboard. Thanks for the info! Guennadi --- Guennadi Liakhovetski - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/