From: Florian Fainelli <[email protected]>
commit 50d899808d33a5b0aa82be23e824119944042689 upstream.
The clear and set masks in the call to phy_set_clr_bits() called from
bcm7xxx_config_init() are inverted. We need to fix this by swapping the two
arguments, that is, set 0 bits, but clear the shade mode 2 enable bit.
Fixes: b560a58c45c66 ("net: phy: add Broadcom BCM7xxx internal PHY driver")
Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/phy/bcm7xxx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/phy/bcm7xxx.c
+++ b/drivers/net/phy/bcm7xxx.c
@@ -270,7 +270,7 @@ static int bcm7xxx_config_init(struct ph
phy_write(phydev, MII_BCM7XXX_100TX_FALSE_CAR, 0x7555);
/* reset shadow mode 2 */
- ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST,
MII_BCM7XXX_SHD_MODE_2, 0);
+ ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, 0,
MII_BCM7XXX_SHD_MODE_2);
if (ret < 0)
return ret;
