On Fri, May 8, 2020 at 1:40 AM Joel Stanley <j...@jms.id.au> wrote: > > On Wed, 6 May 2020 at 23:13, Joel Stanley <j...@jms.id.au> wrote: > > > > Hi Rob, > > > > On Wed, 6 May 2020 at 23:10, Stephen Rothwell <s...@canb.auug.org.au> wrote: > > > > > > Hi all, > > > > > > After merging the aspeed tree, today's linux-next build (arm > > > multi_v7_defconfig) produced this warning: > > > > Thanks Stephen. > > > > > arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts:126.11-130.4: > > > Warning (i2c_bus_reg): /ahb/apb/bus@1e78a000/i2c-bus@80/ipmb1@10: I2C bus > > > unit address format error, expected "40000010" > > > arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts:128.3-30: Warning > > > (i2c_bus_reg): /ahb/apb/bus@1e78a000/i2c-bus@80/ipmb1@10:reg: I2C address > > > must be less than 10-bits, got "0x40000010" > > > arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts:137.11-141.4: > > > Warning (i2c_bus_reg): /ahb/apb/bus@1e78a000/i2c-bus@100/ipmb3@10: I2C > > > bus unit address format error, expected "40000010" > > > arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts:139.3-30: Warning > > > (i2c_bus_reg): /ahb/apb/bus@1e78a000/i2c-bus@100/ipmb3@10:reg: I2C > > > address must be less than 10-bits, got "0x40000010" > > > arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts:148.11-152.4: > > > Warning (i2c_bus_reg): /ahb/apb/bus@1e78a000/i2c-bus@180/ipmb5@10: I2C > > > bus unit address format error, expected "40000010" > > > arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts:150.3-30: Warning > > > (i2c_bus_reg): /ahb/apb/bus@1e78a000/i2c-bus@180/ipmb5@10:reg: I2C > > > address must be less than 10-bits, got "0x40000010" > > > arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts:159.11-163.4: > > > Warning (i2c_bus_reg): /ahb/apb/bus@1e78a000/i2c-bus@300/ipmb7@10: I2C > > > bus unit address format error, expected "40000010" > > > arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts:161.3-30: Warning > > > (i2c_bus_reg): /ahb/apb/bus@1e78a000/i2c-bus@300/ipmb7@10:reg: I2C > > > address must be less than 10-bits, got "0x40000010" > > > > These are IPMB nodes with the SLAVE_ADDRESS bit set: > > > > +&i2c5 { > > + //Host3 IPMB bus > > + status = "okay"; > > + multi-master; > > + ipmb5@10 { > > + compatible = "ipmb-dev"; > > + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; > > + i2c-protocol; > > + }; > > > > This is a correct entry, so dtc should not warn about it. > > I sent a patch for dtc here: > https://lore.kernel.org/lkml/20200508063904.60162-1-j...@jms.id.au/
Patches for dtc need to be against upstream dtc. There's already a similar patch posted for it which I commented on and never saw a respin. Rob